JANSEN® WKB-70 – Hydraulic weed brush with a 70 cm working width and EURO mount

The JANSEN® WKB-70 is a powerful, hydraulically driven weed brush designed for the mechanical removal of weeds and wild vegetation. With a working width of 70 cm, 22 sturdy steel brushes, and hydraulic side-shift capability, it is ideal for cleaning road shoulders, curbs, paved surfaces, and paved paths.

The brush disc is driven by a powerful hydraulic motor with overload protection. The required hydraulic flow is at least 20 l/min and can be as high as 90 l/min. The oil flow can be adjusted manually.

Thanks to the EURO mount, the WKB-70 can be used on various suitable carrier vehicles. The 40-cm hydraulic side shift allows for working along edges and in hard-to-reach areas.

The brush angle can be manually adjusted using a spindle. An integrated anti-skid mat and practical support feet round out the robust design.

The key advantages of the JANSEN® WKB-70 at a glance

• 70 cm working width: For thorough cleaning of paths, paved areas, and curbs.
• 50 cm brush deck: Robust deck with a total of 22 steel brushes.
• 22 individually replaceable steel brushes: Ideal for dense vegetation and stubborn weeds.
• Hydraulic brush drive: Powerful hydraulic motor with overload protection.
• 20–90 l/min hydraulic flow: Manually adjustable.
• 40 cm hydraulic side shift: For working along edges and around obstacles.
• Manual tilt adjustment: Easy adjustment via a spindle.
• EURO mounting: For compatible carrier vehicles with the appropriate mounting.
• Splash guard mat: Integrated and adjustable.
• Support legs: For convenient and secure parking.
• Approx. 195 kg net weight: Robust construction for regular cleaning tasks.

70 cm working width for effective weed removal

The JANSEN® WKB-70 has a working width of 70 cm and a brush disc with a diameter of 50 cm.

A total of 22 sturdy steel brushes mechanically remove weeds and stubborn vegetation from paved surfaces.

This makes the machine particularly suitable for cleaning paved areas, road shoulders, and curbs.

Note: The steel brushes can damage sensitive surfaces. The suitability of the respective pavement should be checked before use.

22 sturdy steel brushes – individually replaceable

The brush plate of the JANSEN® WKB-70 is equipped with 22 steel brushes.

The robust steel brushes are particularly suitable for dense vegetation and stubborn weeds.

Each brush is directly screwed in place and can be replaced individually when worn. This means that not all brushes need to be replaced at the same time.

The individual steel brushes have a diameter of approx. 1.7 cm and a length of approx. 30 cm.

Hydraulic drive with overload protection

The JANSEN® WKB-70 is powered by a high-performance hydraulic motor.

The motor features an overload protection and requires a hydraulic flow rate of at least 20 l/min.

The permissible flow range extends up to 90 l/min. The oil flow can be adjusted manually.

For operation, the carrier vehicle requires a double-acting hydraulic control circuit as well as a 12-volt connection for the solenoid control valve.

40 cm hydraulic side shift

The JANSEN® WKB-70 features a boom with 40 cm hydraulic side shift.

Adjustment is performed via a hydraulic cylinder and allows for flexible positioning of the brush.

This makes it particularly easy to clean curb edges, road edges, and hard-to-reach edge areas.

Manual tilt adjustment and adjustable protective mat

The tilt of the brush deck can be adjusted using a manual spindle.

This allows the brush position to be adapted to the respective working conditions and the surface to be cleaned.

In addition, an adjustable splash guard mat is integrated to reduce the uncontrolled ejection of dirt and plant debris.

EURO mounting for various carrier vehicles

The JANSEN® WKB-70 is equipped with a EURO mounting.

This allows it to be used on various suitable carrier vehicles with the appropriate mounting and hydraulic equipment.

Operation requires a double-acting hydraulic connection, a 12-volt connection, and a hydraulic flow rate of at least 20 l/min.

The integrated support legs allow for convenient and safe parking of the machine.

Versatile applications of the JANSEN® WKB-70

• Paved surfaces: Mechanical removal of weeds and vegetation.
• Curb edges: Thorough cleaning along streets and paths.
• Roadside verges: Removal of weeds and unwanted vegetation.
• Yard and business areas: Cleaning of paved outdoor areas.
• Property maintenance: Maintenance of paths, driveways, and paved areas.
• Municipal green space and area maintenance: Mechanical weed removal on suitable surfaces.

The WKB-70 is particularly suitable for users who want to remove weeds mechanically and without chemical herbicides.

Technical Specifications of the JANSEN® WKB-70

• Model: JANSEN® WKB-70
• Part Number: 1516510
• Equipment Type: Hydraulic weed brush / weed broom / weed brush
• Working width: Ø 70 cm
• Brush disc: Ø 50 cm
• Number of steel brushes: 22
• Brush material: Steel
• Brush mounting: Individually bolted and replaceable
• Dimensions of steel brushes: Ø 1.7 cm, length 30 cm
• Drive: Hydraulic
• Hydraulic motor: With overload protection
• Required hydraulic flow rate: At least 20 l/min
• Maximum hydraulic flow rate: 90 l/min
• Oil flow: Manually adjustable
• Required hydraulic control circuits: 1 × double-acting
• Electrical connection: 12 volts for solenoid control valve
• Hydraulic hoses: 2 pieces, each 2 m long
• Mounting: EURO mounting
• Hydraulic side shift: 40 cm
• Tilt adjustment: Manual via spindle
• Anti-slip mat: Integrated and adjustable
• Support legs: Included
• Net weight: Approx. 195 kg
• Dimensions when assembled (L × W × H): Approx. 200 × 85 × 85 cm
• Packaging dimensions (L × W × H): Approx. 164 × 88 × 60 cm
• Weight including packaging: Approx. 234 kg
• Packaging: Steel frame
• Assembly time: Approx. 1–2 hours

Scope of delivery

• JANSEN® WKB-70 Weed Brush with EURO mount
• Brush disc with 22 steel brushes
• Hydraulic motor with overload protection
• Hydraulic boom with 40 cm lateral shift
• 2 hydraulic hoses, each 2 m long
• Adjustable anti-slip mat
• Support legs
• German installation and operating instructions

Delivery & Commissioning

The JANSEN® WKB-70 is well-packaged in a sturdy steel frame. Allow approximately 1–2 hours for final assembly. Assembly is simple. A German assembly and operating manual is included with the machine.

Important: Operation requires a double-acting hydraulic connection, a 12-volt connection, and a hydraulic flow rate of at least 20 l/min.

JANSEN® – Expertise, Master Workshop, and Spare Parts Supply

JANSEN® stands for robust machines, personalized advice, and reliable service. Thanks to our in-house master workshop and a comprehensive spare parts supply, we’re here to support you even after your purchase.

If you have technical questions or issues, you can reach our expert representatives directly.

Frequently Asked Questions (FAQ) about the JANSEN® WKB-70

1. For which carrier vehicles is the JANSEN® WKB-70 suitable?

The WKB-70 features a EURO mounting and is suitable for appropriately equipped carrier vehicles. A double-acting hydraulic control circuit, a 12-volt connection, and a minimum 20 l/min hydraulic flow rate are required.

2. What is the working width of the JANSEN® WKB-70?

The weed brush has a working width of 70 cm. The brush disc has a diameter of 50 cm and is equipped with a total of 22 steel brushes.

3. Can the steel brushes be replaced individually?

Yes. The 22 steel brushes are individually bolted on and can be replaced separately when worn. The brushes are particularly suitable for dense vegetation and stubborn weeds.

4. How does the hydraulic side shift work?

The JANSEN® WKB-70 features a hydraulic side shift of 40 cm. A hydraulic cylinder allows the brush to be positioned laterally. This makes it easy to clean curbs, path edges, and perimeter areas.

5. What hydraulic power does the JANSEN® WKB-70 require?

Operation requires a minimum 20 l/min hydraulic flow rate. The maximum flow rate is 90 l/min and can be adjusted manually. Additionally, a double-acting hydraulic control circuit and a 12-volt connection for the solenoid control valve are required.