JANSEN® TBG-200 – Rugged tractor-mounted auger with PTO drive, Category I/II three-point hitch, and drive shaft included

The JANSEN® TBG-200 is a robust and versatile tractor-mounted auger for three-point hitch attachment. It is suitable for drilling holes in the ground when erecting fences, for planting, and for numerous applications in gardening, landscaping, agriculture, and forestry.

The post hole digger is attached to the Category I or II three-point hitch of a suitable tractor. It is powered by the tractor PTO shaft at 540 rpm. The required adjustable PTO shaft with protective cover is included in the scope of delivery.

A special feature of the JANSEN® TBG-200 is the specially reinforced gearbox with a reduction ratio of 1:3. The sturdy design was developed for demanding drilling tasks and allows for use with various drill bit diameters.

The tractor-mounted auger is designed for tractors with a power rating of at least 15 PS. Depending on the auger diameter used, soil conditions, and operating conditions, a higher tractor power rating may be required.

For the JANSEN® TBG-200, five auger diameters ranging from 150 to 600 mm are available. The compatible augers are 1.25 meters long and feature interchangeable auger tips and cutting blades.

Important: The offer includes the tractor auger, including the PTO shaft. Any augers shown in product images are not included in the scope of delivery and must be ordered separately.

---

The key advantages of the JANSEN® TBG-200 at a glance

• For tractors with 15 PS or more: Suitable for tractors with sufficient engine power and the appropriate equipment.
• Category I and II three-point hitch: Flexible mounting on various compatible tractors.
• PTO drive at 540 rpm: Power transmission directly via the tractor’s PTO.
• Drive shaft included: Adjustable PTO shaft with protective cover included in the scope of delivery.
• Specially reinforced gearbox: Robust construction for demanding drilling applications.
• Gear reduction ratio of 1:3: Mechanical reduction for the drill drive.
• Shear bolt for overload protection: Safety system to protect the drivetrain in case of overload.
• Five auger sizes available: 150, 225, 300, 450, and 600 mm in diameter.
• 1.25 m auger length: Standardized length for the separately available augers.
• Replaceable auger tips: Maintenance-friendly design of the compatible augers.
• Replaceable cutting blades: Wear parts can be replaced as needed.
• Robust construction: For regular use in both residential and commercial settings.
• Approx. 80 kg weight: Sturdy construction for tractor attachment.
• Versatile: For fence construction, planting holes, drainage work, and property maintenance.
• No separate engine required: The tractor provides the drive power.

---

Tractor auger for Category I and II three-point hitches

The JANSEN® TBG-200 was developed for mounting on the three-point hitch of a tractor.

The design allows for attachment to compatible tractors with a Category I or Category II three-point hitch.

This makes the unit suitable for various tractor models, provided the technical requirements are met.

Category I three-point hitch

The TBG-200 can be mounted on tractors with a compatible Category I three-point hitch.

This also allows it to be used with appropriately equipped smaller tractors.

Category II three-point hitch

Alternatively, the tractor auger can be attached to a suitable Category II three-point hitch.

This expands the range of applications on different tractors.

Tractor power: 15 PS or more

The minimum power specified by the manufacturer is 15 PS.

However, depending on the selected drill bit diameter and the prevailing soil conditions, higher engine power may be required.

Especially when using larger drill bit diameters or working in challenging soil conditions, the tractor’s power capacity should be checked before use.

---

PTO drive at 540 rpm

The JANSEN® TBG-200 is driven via the tractor’s PTO.

The required PTO speed is 540 rpm.

The drive power is transmitted from the tractor to the reinforced gearbox of the earth auger via the drive shaft.

An additional gasoline engine or a separate electric motor is not required.

Power take-off shaft included in the scope of delivery

The scope of delivery includes an adjustable power take-off shaft or drive shaft with protective cover.

This means that an essential component of the drive system is already included.

Before first use, the drive shaft must be adjusted to the required length and adapted to the existing connection conditions in accordance with the operating instructions.

Mechanical drive for reliable drilling operations

Direct power transmission via the tractor’s PTO shaft enables a mechanical drilling drive.

In combination with the reinforced gearbox, the TBG-200 is suitable for a variety of drilling applications.

---

Specially reinforced gearbox with a 1:3 reduction ratio

A key quality feature of the JANSEN® TBG-200 is the specially reinforced gearbox.

The gearbox was designed to withstand the stresses of drilling in various soil types.

The gearbox reduction ratio specified by the manufacturer is 1:3.

Robust Construction for Demanding Applications

When drilling holes in the ground, the drive can be subjected to considerable stress depending on soil conditions.

The reinforced gearbox is therefore an important component of the machine’s robust construction.

According to the manufacturer, the unit is also designed for use with more powerful tractors.

Fill with gear oil before initial startup

Important: The gearbox of the JANSEN® TBG-200 must be filled with oil before initial startup.

You will need 1.2 liters of 80W90 gear oil.

Filling must be performed according to the enclosed instructions.

Operating the unit without the required gear oil fill level can result in damage to the gearbox.

---

Shear Bolt Safety Device as Overload Protection

The JANSEN® TBG-200 features a safety system with a shear bolt.

This safety feature is designed to protect the drivetrain from damage in the event of an overload.

When drilling, for example, rocks or other obstacles can cause the drill bit to suddenly jam.

The shear bolt is designed as a mechanical safety element for such overload situations.

Protection for the transmission and drivetrain

In the event of an overload, the shear pin safety device is designed to help prevent damage to the transmission, drive shaft, and tractor.

It is an important component of the tractor drill’s safety concept.

Do not bypass the safety device

To ensure safe operation, the shear pin safety device must not be replaced with unsuitable fasteners or rendered inoperative.

If the overload protection is triggered, the cause of the jam and the condition of the unit must be checked before restarting operation.

---

Five auger sizes ranging from 150 to 600 mm are available

For the JANSEN® TBG-200, five different auger diameters are available.

This allows the tractor auger to be adapted to various tasks and required hole diameters.

The corresponding augers all have a uniform length of 1.25 meters.

150-mm-diameter auger

The 150-mm auger is suitable, for example, for smaller holes when installing fence posts.

225-mm-diameter auger

The 225-mm auger offers a larger drilling diameter for various fencing and planting projects.

300-mm-diameter earth auger

The 300-mm earth auger can be used to create larger holes for corresponding post-setting and planting tasks.

450-mm-diameter earth auger

The 450-mm earth auger is suitable for applications requiring a larger hole diameter, such as certain planting tasks.

600-mm-diameter auger

For particularly large holes, a 600-mm auger is available.

With this diameter, special attention must be paid to ensuring sufficient tractor power and suitable soil conditions.

Important: All augers are sold separately. The basic JANSEN® TBG-200 package does not include an auger.

---

1.25-meter-long augers with replaceable wear parts

The augers available for the JANSEN® TBG-200 have a length of 1.25 meters.

The augers are manufactured according to JANSEN® specifications and are subject to quality control.

A particular advantage is the maintenance-friendly design of the auger tools.

Screw-off auger tips

The auger tips of the compatible JANSEN® augers are screw-off.

This allows them to be replaced in case of wear or damage.

Replaceable cutting blades

The cutting blades of the earth augers are also replaceable.

This simplifies maintenance and supports long-term use of the drilling tools.

Suitable augers for various tasks

By selecting different auger diameters, the TBG-200 can be configured for various applications.

Before purchasing, the required auger diameter should be selected based on the intended application.

---

Efficient drilling for fence construction

The JANSEN® TBG-200 is particularly well-suited for drilling post holes in fence construction.

For longer fence runs, it is often necessary to drill numerous holes at as uniform intervals as possible.

A tractor-powered auger can significantly simplify this work compared to manual digging.

Post holes for property fences

With the right auger, you can drill holes for installing fence posts.

The required diameter depends on the post system used and the structural requirements.

Fence Construction on Agricultural Land

The TBG-200 can also be used when erecting or replacing fences on pastures and agricultural properties.

The combination of tractor attachment and PTO drive facilitates work along longer fence lines.

Working on Larger Properties

For large-scale fencing projects, a tractor-mounted drilling rig offers a practical way to drill numerous holes in succession.

Actual performance depends on soil conditions, the drill bit used, and the tractor employed.

---

Digging planting holes for trees, shrubs, and landscaping

In addition to fence construction, the JANSEN® TBG-200 is also suitable for digging planting holes.

This makes the unit a versatile tool for planting work on larger properties.

Preparing Tree Plantings

With a suitable auger diameter, planting holes can be prepared for specific tree plantings.

The required size of the planting hole depends on the specific plant and its root ball.

Planting Shrubs and Woody Plants

The tractor-mounted auger can also be used for planting shrubs and other woody plants.

The selection of different auger diameters allows for adaptation to various planting projects.

Carrying out Larger Planting Projects

The tractor-powered auger can reduce the amount of work required, especially for recurring planting tasks or larger planting areas.

This makes the TBG-200 a practical tool for gardeners, landscapers, and agricultural and forestry operations.

---

Versatile Applications of the JANSEN® TBG-200

Gardening and Landscaping

The JANSEN® TBG-200 is suitable for digging holes for planting, fence construction projects, and other tasks in gardening and landscaping.

Agriculture

In agriculture, the tractor-mounted auger can be used, for example, in the construction and maintenance of pasture fences.

Forestry

The TBG-200 also offers versatile applications for suitable planting and land preparation tasks in forestry.

Fence Construction and Post Installation

With the right auger, holes can be drilled for various post structures.

Drainage Work

The TBG-200 can also be used for suitable tasks involved in preparing drainage measures.

Before undertaking such work, local soil conditions as well as any potential underground utility lines and systems must be checked.

---

Robust Construction for Demanding Applications

The JANSEN® TBG-200 was developed for regular use with compatible tractors.

With a weight of approximately 80 kg, the unit features a stable design.

The specially reinforced gearbox and the mechanical overload protection are key components of the robust construction.

The machine is suitable for a variety of applications in both residential and commercial settings.

The actual drilling performance depends primarily on the tractor’s engine power, the drill bit diameter, and the soil conditions.

---

Technical Specifications of the JANSEN® TBG-200

• Model: JANSEN® TBG-200
• Part Number: 1175009
• Equipment Type: Tractor auger / Earth auger / PTO earth auger
• Mounting: Three-point hitch, Categories I and II
• Suitable carrier vehicles: Tractors with a compatible three-point hitch and PTO shaft
• Required tractor power: At least 15 PS; may require more depending on auger size
• Drive: Tractor PTO shaft
• Required PTO speed: 540 rpm
• Drive shaft: Adjustable, with protective cover, included
• Gearbox: Specially reinforced
• Gear reduction ratio: 1:3
• Overload protection: Shear bolts
• Number of available auger sizes: 5
• Available auger diameters: 150, 225, 300, 450, and 600 mm
• Length of compatible augers: 1,250 mm
• Auger tips: Removable and replaceable
• Cutter blades: Replaceable
• Augers included: No, sold separately
• Net weight: Approx. 80 kg
• Weight with packaging: Approx. 105 kg
• Packaging dimensions (L × W × H): Approx. 213 × 67 × 32 cm
• Required transmission oil: 80W90
• Transmission oil capacity: 1.2 liters
• Fill with transmission oil before commissioning: Yes

---

Scope of delivery

The JANSEN® TBG-200 comes with the following items:

• JANSEN® TBG-200 tractor auger for Cat. I and II three-point hitch
• Specially reinforced gearbox with a 1:3 reduction ratio
• Adjustable PTO shaft / drive shaft with protective cover
• Shear bolt safety device as mechanical overload protection
• Instructions for assembly and startup

Important: The appropriate augers with diameters of 150, 225, 300, 450, or 600 mm are not included in the scope of delivery and must be ordered separately.

The tractor required for operation is also not included in the scope of delivery.

For initial startup, you will also need 1.2 liters of 80W90 gear oil.

---

Delivery & Startup

The JANSEN® TBG-200 is delivered packaged for transport.

The weight, including packaging, specified by the manufacturer is approximately 105 kg.

The packaging dimensions are approximately 213 × 67 × 32 cm.

Mounting to the Three-Point Hitch

The tractor auger is attached to the Category I or II three-point hitch of a suitable tractor.

Before mounting, check the compatibility of the hitch and the required tractor power.

Connect the PTO shaft

The included adjustable PTO shaft with protective cover is used to transmit power between the tractor and the auger.

Adjustment and installation must be performed according to the enclosed instructions.

The required PTO speed is 540 rpm.

Fill the gearbox with oil before initial startup

Important: The gearbox of the JANSEN® TBG-200 must be filled with oil before initial startup.

This requires 1.2 liters of 80W90 gear oil.

• Gearbox oil: 80W90
• Amount of oil required: 1.2 liters
• Filling: Required before first use

Corresponding instructions are included with the unit.

Install the appropriate auger

A suitable separately available auger is required for drilling operations.

Diameters of 150, 225, 300, 450, and 600 mm are available.

The selection should be based on the intended application, soil conditions, and available tractor power.

Check safety before first use

Before operation, all fasteners, the drive shaft with protective cover, and the shear bolt safety device should be checked according to the instructions.

Safety Notice: Before drilling, ensure that there are no underground electrical, gas, water, or other utility lines in the work area. During operation, observe the required safety distances and follow all instructions in the operator’s manual.

---

JANSEN® – In-House Development, Master Workshop, and Spare Parts Supply

JANSEN® develops its own machines and, in addition to robust equipment technology, offers personal consultation, its own master workshop, and a reliable spare parts supply.

The tractor-mounted drilling rigs are manufactured according to JANSEN® specifications and are subject to quality control.

According to the manufacturer, required replacement parts are generally available directly from stock.

For technical questions, problems, or questions regarding commissioning, expert representatives are available by phone.

Many JANSEN® machines can be viewed and tested in the showroom by prior appointment.

This way, customers benefit not only from a robust tractor-mounted drilling rig but also from expert support and long-term service.

---

Frequently Asked Questions (FAQ) about the JANSEN® TBG-200

1. For which tractors is the JANSEN® TBG-200 suitable?

The JANSEN® TBG-200 is suitable for tractors with a Category I or II three-point hitch. The minimum required power is 15 PS. Depending on the drill bit diameter used and soil conditions, higher tractor power may be necessary.

2. Is the PTO shaft included with the JANSEN® TBG-200?

Yes. An adjustable PTO shaft with a protective cover is included in the scope of delivery. The tractor auger is driven via the tractor PTO shaft at 540 rpm.

3. Which auger bits are compatible with the JANSEN® TBG-200?

Earth augers with 150, 225, 300, 450, and 600 mm diameters are available for the TBG-200. The compatible augers have a length of 1.25 meters. Their auger tips and cutting blades can be replaced. The augers must be ordered separately.

4. What safety feature does the JANSEN® TBG-200 have?

The tractor auger is equipped with a shear bolt for overload protection. This mechanical safety feature is designed to prevent damage to the transmission, the drive shaft, and the tractor in the event of an overload. In addition, the unit features a specially reinforced transmission with a reduction ratio of 1:3.

5. What type of transmission oil does the JANSEN® TBG-200 require?

The transmission must be filled with 1.2 liters of 80W90 transmission oil before initial operation. Instructions are included. Before first use, the three-point hitch, the drive shaft, and the shear bolt safety device should also be checked.