JANSEN® RD-300proS Tracked Dump Truck – High-Tipping System & Hydraulic Self-Loading Bucket

The JANSEN® RD-300proS is a self-propelled crawler dumper that combines a hydraulic high-tipping system with a hydraulic self-loading bucket. Compared to the RD-300pro, this model also features the self-loading function. This allows suitable materials to be picked up, transported, and then unloaded at an elevated position.

The RD-300proS is equipped with a 6:2 transmission with 6 forward and 2 reverse gears. Its tracked undercarriage facilitates movement on uneven, muddy, sandy, and sloped terrain. With a machine width of approx. 89 cm, the tracked dumper can also be used on relatively narrow paths and through corresponding passageways.

Power is provided by a Briggs & Stratton XR1450 4-stroke OHV gasoline engine with 9 PS and a displacement of 306 ccm. The maximum payload is 500 kg. A fold-down footboard allows the operator to ride on the machine while it is in motion.

Key Benefits

• Hydraulic self-loading bucket for picking up suitable materials
• Hydraulic high-tilt system for elevated unloading
• Tilt height of approx. 142 cm
• Maximum payload of 500 kg
• 6 forward and 2 reverse gears
• Briggs & Stratton XR1450 4-stroke OHV gasoline engine
• 9 PS and 306 ccm displacement
• Self-propelled tracked dumper with chain drive
• Hydraulically liftable and tiltable body
• Body tilt angle of 90°
• Reinforced body with 3 mm wall thickness
• Straight-out bucket discharge
• Steering via steering brake
• Folding footboard for riding along
• Ground clearance of approx. 120 mm
• Compact machine width of approx. 89 cm

Hydraulic Self-Loading Shovel

The hydraulic self-loading shovel expands the range of applications for the JANSEN® RD-300proS. It allows suitable materials to be picked up and loaded directly into the bucket. This enables pickup, transport, and unloading to be performed with a single machine.

The bucket measures approximately 35 x 66 x 20 cm (L x W x H) and is suitable, for example, for picking up sand, soil, gravel, stones, and other suitable bulk materials.

When used in conjunction with the hydraulic high-tilt system, the picked-up material can then be transported and unloaded at an elevated position.

Hydraulic high-tilt system with a tilt height of 142 cm

In addition to the self-loading bucket, the RD-300proS features a hydraulic high-tipping system. The bucket can be raised hydraulically and then tipped.

The specified tipping height is approx. 142 cm. This allows the transported material to be emptied directly into suitable receiving containers, trailers, or loading areas, for example.

When lowered, the front edge of the loading bed is approx. 91 cm above the ground. When the body is raised, the height of the front edge is approximately 153 cm.

The tipping angle is 90°. The hydraulic system handles the lifting and tipping of the body.

Reinforced body with straight discharge

The loading hopper of the JANSEN® RD-300proS is manufactured in a reinforced design and has a wall thickness of 3 mm.

The hopper discharge is straight rather than tapered. This facilitates the unloading of the transported bulk material.

The dimensions of the loading hopper are approximately 100 x 67 x 45 cm (L x W x H).

Up to 500 kg payload

The JANSEN® RD-300proS has a maximum payload of 500 kg. This allows it to carry and move a variety of suitable bulk and transport materials.

Due to the high-tipping system, the machine has a higher center of gravity. This must be taken into account, especially when working on sloped or uneven terrain.

6 forward and 2 reverse gears

The 6:2 transmission provides a total of six forward gears and two reverse gears. This allows the driving style to be adapted to different work and terrain conditions.

• Forward gears: 6
• Reverse gears: 2
• Steering: via steering brake

Caterpillar tracks for various surfaces

The track drive enhances the RD-300proS’s traction on a variety of surfaces. The tracked dumper is designed for work on uneven, muddy, sandy, and sloped terrain.

The ground clearance is approx. 120 mm. With a total width of approx. 89 cm, the machine remains comparatively compact despite its self-loading bucket and high-tipping system.

9 PS Briggs & Stratton XR1450 gasoline engine

The JANSEN® RD-300proS is powered by a Briggs & Stratton XR1450 4-stroke OHV gasoline engine. The engine has 9 PS and a displacement of 306 ccm.

It runs on regular gasoline. The engine is started using a recoil starter. The fuel tank has a capacity of 5.3 liters.

Foldable footboard for riding along

The JANSEN® RD-300proS is equipped with a folding footboard. This allows the operator to ride on the machine while it is in motion.

If the footboard is not needed, it can be folded away.

For various transport, loading, and unloading tasks

The combination of tracked undercarriage, hydraulic self-loading bucket, and hydraulic high-tipping system enables various work steps to be performed with a single machine. Suitable materials can be picked up, transported in the bucket, and then unloaded at an elevated position.

Suitable materials include, for example:

• Sand
• Soil
• Gravel
• Stones
• Other suitable bulk and transport materials

Technical Specifications

• Model: JANSEN® RD-300proS
• Machine type: self-propelled tracked dumper / crawler dumper
• Engine: Briggs & Stratton XR1450
• Engine type: 4-stroke OHV gasoline engine
• Engine power: 9 PS
• Displacement: 306 ccm
• Fuel: Regular gasoline
• Fuel tank capacity: 5.3 liters
• Starter: Recoil starter
• Transmission: 6:2
• Forward gears: 6
• Reverse gears: 2
• Steering: Steering brake
• Max. payload: 500 kg
• Self-loading function: hydraulic
• High-tipping system: hydraulic
• Dump bed drive: hydraulic
• Tilt angle: 90°
• Tipping height: approx. 142 cm
• Dump bed wall thickness: 3 mm
• Dump bed discharge type: straight
• Dump bed dimensions: approx. 100 x 67 x 45 cm (L x W x H)
• Self-loading shovel dimensions: approx. 35 x 66 x 20 cm (L x W x H)
• Height of lower front edge of loading bed: approx. 91 cm from the ground
• Height of upper front edge of loading bed: approx. 153 cm from the ground
• Ground clearance: approx. 120 mm
• Step: included, foldable
• Dimensions when assembled: approx. 237 x 89 x 124 cm (L x W x H, top edge of loading bed)
• Total weight: approx. 400 kg
• Packaging dimensions: approx. 220 x 82 x 142 cm (L x W x H)
• Weight including packaging: approx. 498 kg

Scope of Delivery

• JANSEN® RD-300proS Tracked Dump Truck
• Hydraulic Self-Loading Bucket
• German Operating Instructions
• Exploded View
• Installation Instructions for Mounting the Bucket

Delivery & Commissioning

The unit is delivered well-packaged on a wooden pallet. The self-loading bucket must still be assembled after delivery. You should allow approximately 45 minutes for final assembly and commissioning.

Due to the dimensions and weight of the components, it is recommended that assembly be performed by two people.

IMPORTANT: The hydraulic oil level must be checked before initial commissioning and, if necessary, topped off with HLP-46 hydraulic oil. Likewise, the engine oil level must be checked before initial operation and, if necessary, topped off with 10W40 or 15W40 engine oil.

If you have any questions regarding installation or commissioning, we will of course be happy to assist you personally by phone.

Service, Replacement Parts & Showroom

Even after your purchase, we’re here to assist you personally with any technical questions or problems. With our in-house master workshop and an extensive supply of replacement parts, we provide you with a direct point of contact. We have many replacement parts in stock.

Our expert staff will also assist you with technical questions personally by phone.

Many of our machines are set up and ready for operation in our showroom. You are welcome to view and test the equipment on-site by appointment.

Frequently Asked Questions (FAQ)

What distinguishes the JANSEN® RD-300proS from the RD-300pro?

Answer: In addition to the hydraulic high-tilt system, the RD-300proS features a hydraulic self-loading bucket. This allows the machine to pick up, transport, and unload suitable materials at an elevated position.

How does the hydraulic self-loading bucket work?

Answer: The hydraulic self-loading bucket can pick up suitable materials such as sand, soil, gravel, or stones and load them into the bucket. The bucket measures approximately 35 x 66 x 20 cm.

What is the tipping height of the JANSEN® RD-300proS?

Answer: The hydraulic high-tipping system achieves a tipping height of approximately 142 cm. The front edge of the raised loading bed is approximately 153 cm above the ground.

What is the maximum payload?

Answer: The maximum payload of the JANSEN® RD-300proS is 500 kg. When working on sloped terrain, special attention must be paid to the higher center of gravity of the high-tipping loader.

What should be considered during delivery and commissioning?

Answer: The self-loading bucket must still be assembled after delivery. Allow approximately 45 minutes for final assembly and commissioning. Assembly should be performed by two people whenever possible. Before initial operation, the hydraulic oil level and engine oil level must also be checked and topped off if necessary.