JANSEN® RD-300 Tracked Dump Truck – 500 kg Payload, 10 PS & 6+2 Gears

The JANSEN® RD-300 is a self-propelled crawler dumper and an evolution of the RD-200. Equipped with a 6:2 transmission with 6 forward and 2 reverse gears, it can transport sand, soil, gravel, rocks, and other suitable materials.

On level ground, the RD-300 can be loaded with up to 500 kg. Power is provided by a Briggs & Stratton 4-stroke OHV gasoline engine with 10 PS. The maximum travel speed is approximately 6 km/h forward and approximately 2 km/h in reverse.

The dump body is tipped via a hydraulic power unit and a hydraulic cylinder. With a tipping angle of more than 90° and a straight-out dump body discharge, it is designed for rapid unloading of the transported material.

Key advantages

• Maximum payload of 500 kg on level ground
• 6 forward and 2 reverse gears
• Max. forward speed: approx. 6 km/h
• Max. reverse speed: approx. 2 km/h
• Briggs & Stratton 4-stroke OHV gasoline engine with 10 PS
• Self-propelled tracked dumper with track drive
• Hydraulically tilting dump bed
• Dump bed tilt angle of more than 90°
• Reinforced body with 3 mm wall thickness
• Straight body discharge
• Body dimensions of approx. 1,000 x 670 x 445 mm
• For various transport tasks on uneven terrain

6 forward and 2 reverse gears

The JANSEN® RD-300 features a 6:2 transmission. A total of six forward gears and two reverse gears are available, allowing the travel speed to be adjusted to different work situations.

• Forward: 6 gears, max. approx. 6 km/h
• Reverse: 2 gears, max. approx. 2 km/h

Hydraulic tipping body with a tilt angle of more than 90°

The RD-300’s body is raised and lowered using a hydraulic power unit and a hydraulic cylinder. The lifting and lowering process takes just a few seconds.

The tip angle of the body is more than 90°. This allows the loaded material to be tipped out a long way, making it easier to empty the body.

The reinforced hopper has a wall thickness of 3 mm and features a straight design at the discharge end. The dimensions of the loading hopper are approximately 1,000 x 670 x 445 mm.

Up to 500 kg payload

On level ground, the JANSEN® RD-300 can be loaded with up to 500 kg. As the grade increases, the maximum payload decreases accordingly.

• Level ground: up to 500 kg payload
• 17% or approx. 10° incline: up to 450 kg payload
• 30% or approx. 17° incline: up to 375 kg payload

The load should therefore always be adjusted to the respective terrain and incline conditions.

Track drive for uneven terrain

Thanks to its track drive, the RD-300 is designed for transport work on uneven terrain. The track undercarriage facilitates movement on difficult surfaces and on inclines.

10 PS Briggs & Stratton gasoline engine

The JANSEN® RD-300 is powered by a Briggs & Stratton 4-stroke OHV gasoline engine with 10 PS. Regular gasoline is used as fuel. The engine is started using a recoil starter.

The fuel tank has a capacity of 3.6 liters.

For various transport tasks

The JANSEN® RD-300 is suitable for transporting various suitable materials, such as:

• Sand
• Soil
• Gravel
• Stones
• Other suitable bulk and transport materials

Technical Specifications

• Model: JANSEN® RD-300
• Machine type: self-propelled crawler dumper / track dumper
• Engine: Briggs & Stratton 4-stroke OHV gasoline engine
• Engine power: 10 PS
• Fuel: Regular gasoline
• Starter: Recoil starter
• Fuel tank capacity: 3.6 liters
• Transmission: 6:2
• Forward gears: 6
• Reverse gears: 2
• Forward speed: max. approx. 6 km/h
• Reverse speed: max. approx. 2 km/h
• Max. payload on level ground: 500 kg
• Payload at 17% / approx. 10° incline: up to 450 kg
• Payload on a 30% / approx. 17° incline: up to 375 kg
• Rear ground clearance: approx. 110 mm
• Dump bed drive: hydraulic
• Dump bed tilt angle: more than 90°
• Dump body wall thickness: 3 mm
• Dump body discharge type: straight
• Dump body dimensions: approx. 1,000 x 670 x 445 mm
• Height of front edge of dump body: approx. 600 mm from the ground
• Machine dimensions: approx. 1,850 x 750 x 1,110 mm (L x W x H, hopper at top)
• Dry total weight: approx. 290 kg
• Packaging dimensions: approx. 1,750 x 800 x 1,200 mm
• Weight including packaging: approx. 325 kg

Service, Replacement Parts & Demonstration

Even after your purchase, we’re here to personally assist you with any technical questions or issues. With our in-house master workshop and an extensive spare parts inventory, we provide you with a direct point of contact. We keep many spare parts in stock.

Our expert staff is also available to assist you with technical questions in person or by phone.

Many of our machines are set up and ready for operation in our showroom. You are welcome to view and test the equipment on site by scheduling an appointment in advance.

Frequently Asked Questions (FAQ)

What is the maximum payload of the JANSEN® RD-300?

Answer: On level ground, the maximum payload is 500 kg. On a 17% incline (approx. 10°), the maximum payload is up to 450 kg, and on a 30% incline (approx. 17°), it is up to 375 kg.

How many gears does the RD-300 have?

Answer: The RD-300 is equipped with a 6:2 transmission with 6 forward and 2 reverse gears. The maximum speed is approximately 6 km/h forward and approximately 2 km/h in reverse.

How is the dump body tilted?

Answer: The dump body is raised and lowered via a hydraulic power unit and a hydraulic cylinder. The tilt angle is greater than 90°.

What engine is installed in the JANSEN® RD-300?

Answer: The RD-300 is equipped with a Briggs & Stratton 4-stroke OHV gasoline engine with 10 PS. The engine runs on regular gasoline and is started with a pull-start cord.

How large is the loading bed of the RD-300?

Answer: The loading bed measures approximately 1,000 x 670 x 445 mm and has a wall thickness of 3 mm. The discharge chute is straight.