The sweeping roller is equipped with a plastic bristle assembly and is driven by a powerful hydraulic motor.

It is designed for cleaning various paved surfaces.

Hydraulically driven sweeping roller

The direct hydraulic drive allows the sweeping roller to be operated using the carrier vehicle’s hydraulic system.

A separate gasoline engine is not required.

Also suitable for sweeping light snow

In addition to removing debris, the JK-200 can also be used for sweeping light snow.

This allows the sweeper to be used not only during the warmer months but also under suitable winter conditions.

However, the machine is not intended to replace a snow blower or snow plow when dealing with larger amounts of snow.

Powerful hydraulic motor with a minimum oil flow rate of 20 l/min

The JANSEN® JK-200 is powered by a high-performance hydraulic motor.

Operation requires a hydraulic oil flow rate of at least 20 liters per minute.

The sweeper can be operated with only a double-acting control unit.

Hydraulic Requirements

Before use, verify that the intended carrier vehicle has the required hydraulic equipment.

• Required hydraulic oil flow rate: At least 20 l/min
• Required control unit: 1 × double-acting
• Sweeping roller drive: Hydraulic motor

A suitable hydraulic supply is essential for the proper operation of the sweeper.

160-liter debris collection bin made of 4 mm thick steel

The JANSEN® JK-200 features a robust dirt collection hopper with a capacity of approximately 160 liters.

The collection hopper is made of 4 mm thick steel and is designed to hold the swept-up debris.

This allows debris to be collected during the sweeping process and then emptied as needed.

Hydraulic hopper emptying

The debris collection hopper can be hydraulically emptied.

This facilitates the disposal of the collected debris.

Debris container with infinitely variable height adjustment

The collection container can be infinitely adjusted in height.

This allows its position to be adapted to different operating conditions.

Free Sweeping Without a Collection Bin

The JANSEN® JK-200 also enables so-called free sweeping.

In this mode, the machine operates without the debris collection bin, so that the swept material is not collected in the collection tray.

This feature expands the sweeper’s range of applications.

Three continuously height-adjustable support wheels

A special feature of the JANSEN® JK-200 is the three continuously height-adjustable support wheels.

The wheels have a diameter of 200 mm and are equipped with solid rubber tires.

The height of the support wheels can be adjusted using a crank.

Continuously adjustable working height

The infinitely variable height adjustment allows the sweeper to be precisely adapted to the respective work surface.

This allows the position of the sweeping roller to be adjusted according to the operating conditions.

Lockable crank

The adjustment crank for the support wheels can be locked.

This means the selected height setting does not need to be readjusted for every use, provided the working conditions remain unchanged.

The well-designed height adjustment system ensures consistent sweeping performance and allows the sweeping roller to be adjusted as needed.

Horizontal and vertical leveling with floating position

The JANSEN® JK-200 features horizontal and vertical leveling.

This so-called floating position allows the sweeper to compensate for uneven ground within its range of motion.

This helps ensure consistent guidance of the sweeping roller across the work surface.

Consistent Sweeping Pattern on Various Surfaces

The level compensation helps ensure that the sweeping roller can operate evenly on the surface under suitable ground conditions.

This is particularly advantageous on paved surfaces and slightly uneven, paved substrates.

Fewer manual corrections

The sweeper’s maneuverability allows it to compensate for minor level differences.

This makes cleaning more convenient.

Manually swiveling chassis – 20° to the left and right

The chassis of the JANSEN® JK-200 can be mechanically swiveled 20° to the left and right.

The selected position can then be locked in place.

This allows the sweeper to be adapted to different cleaning situations.

Side Sweeping

With the correct operating technique, the swivel function allows debris to be shifted to the side.

This is particularly useful for free sweeping.

Flexible Adjustment

The manual swivel function allows for adaptation to different surfaces and driving paths.

The maximum swivel angle is 20° per side.

Front and Rear Mounting for Versatile Applications

The JANSEN® JK-200 can be mounted in different ways depending on the carrier vehicle and the available mounting point.

Front mounting for an unobstructed view of the work area

With front mounting, the sweeper is positioned in front of the carrier vehicle.

This mounting method is particularly suitable for targeted cleaning of courtyards and operational areas.

Rear mounting on a tractor

Thanks to the three-point hitch, the JK-200 can also be mounted to the rear hydraulics of a suitable tractor.

This makes it possible to use the sweeper while traveling forward.

This mounting option expands the JK-200’s range of applications and offers additional flexibility when cleaning surfaces.

Optional hydraulic side sweeper for edge areas

A hydraulic side sweeper is available as a separately purchased accessory for the JANSEN® JK-200.

It is mounted on the right side in the direction of travel.

The side sweeper expands cleaning capabilities, particularly along buildings, curbs, and gutter edges.

Cleaning along boundaries

A side sweeper allows access to edge areas that are only partially accessible with the main sweeping roller.

Separately available accessory

Important: The hydraulic side sweeper is not included as standard equipment on the JANSEN® JK-200 and must be ordered separately if needed.

Before operating with additional accessories, the respective hydraulic requirements must be observed.

Robust construction for residential and professional applications

The JANSEN® JK-200 was developed for the regular cleaning of paved surfaces.

With a curb weight of approx. 330 kg, the sweeper features a sturdy construction.

The 4 mm-thick debris collection bin, the height-adjustable support wheels, and the versatile attachment options are designed for a variety of operating conditions.

The JK-200 is therefore suitable for private property owners as well as agricultural operations, property management services, and commercial users.

Versatile Applications of the JANSEN® JK-200

Cleaning Courtyards and Farm Areas

The JANSEN® JK-200 is suitable for the regular cleaning of paved courtyards and farm areas.

With its 200 cm working width, even larger areas can be cleaned efficiently.

Sweeping barns and agricultural areas

The JK-200 can also be used to remove loose debris from suitable paved barn and agricultural areas.

Cleaning roads and driveways

The sweeper is suitable for cleaning asphalt, concrete, and paved surfaces.

Thanks to the swiveling frame, the working position can be adjusted to suit different cleaning situations.

Removing light snow

The rotating sweeping roller can also be used for sweeping light snow.

This gives the JK-200 additional applications during the winter months.

Clean edge areas with the optional side broom

With the separately available side broom, the sweeper can also be used for targeted cleaning of curbs and side boundaries.

Technical Specifications of the JANSEN® JK-200

• Model: JANSEN® JK-200
• Part Number: 1516500
• Equipment Type: Hydraulic tractor sweeper / mounted sweeper
• Working width: 200 cm
• Overall width: 234 cm
• Mounting options: Euro mount, three-point hitch Cat. I/II, and pallet fork mount
• Suitable carrier vehicles: Tractors, forklifts, wheel loaders, and Hoftracs with compatible mounting and hydraulics
• Front mounting: Possible
• Rear mounting: Possible on suitable tractors via the three-point hitch
• Drive: Hydraulic motor
• Required hydraulic oil flow rate: At least 20 l/min
• Required control valve: 1 × double-acting
• Sweeping roller diameter: 480 mm / 48 cm
• Sweeping roller material: Plastic
• Chassis swivel range: 20° to the left and right
• Chassis lockable: Yes
• Dirt collection bin: Included
• Dirt bin capacity: Approx. 160 liters
• Dirt bin material thickness: 4 mm steel
• Dirt container height-adjustable: Yes, infinitely variable
• Container emptying: Hydraulic
• Sweeping without collection container: Possible
• Number of support wheels: 3
• Support wheel diameter: 200 mm
• Support wheel tires: Solid rubber
• Support wheel height adjustment: Continuously variable
• Lockable adjustment crank: Yes
• Leveling: Horizontal and vertical
• Floating position: Available
• Splash guard: Available
• Optional side broom: Right side, sold separately
• Net weight: Approx. 330 kg
• Packaging dimensions (L × W × H): Approx. 229 × 107 × 86 cm
• Weight with packaging: Approx. 434 kg
• Packaging: Wooden crate

Scope of Delivery

The JANSEN® JK-200 comes with the following:

• JANSEN® JK-200 tractor-mounted sweeper with a 200 cm working width
• Hydraulically driven sweeping roller with a diameter of 48 cm and plastic bristles
• Dirt collection hopper with a capacity of approx. 160 liters
• Hydraulic hopper emptying
• Euro mount, three-point hitch (Cat. I/II), and pallet fork mount
• Three continuously height-adjustable support wheels with solid rubber tires
• Manually swiveling chassis with locking mechanism
• Splash guard
• German operating instructions
• Exploded view

Important: The hydraulic side sweeper is an optional accessory and is not included in the standard scope of delivery.

A tractor, wheel loader, forklift, or other carrier vehicle is also not included.

Delivery & Commissioning

The JANSEN® JK-200 is delivered well-packaged and disassembled in a sturdy wooden crate.

Final Assembly

You should plan on approximately 1 to 2 hours for final assembly.

According to JANSEN®, assembly is generally straightforward. However, it is recommended that two people perform the assembly.

A German operating manual and an exploded view diagram are included in the scope of delivery.

Check Mounting and Carrier Vehicle

Before first use, ensure that the intended carrier vehicle has a suitable mounting point.

The JANSEN® JK-200 offers the following mounting options:

• Euro mount
• Three-point hitch, Categories I and II
• Pallet fork mount

In addition, the permissible load capacity and the suitability of the carrier vehicle for operating the sweeper must be verified.

Check hydraulic requirements

To operate the JK-200, a hydraulic oil flow rate of at least 20 liters per minute is required.

The base machine can be operated with a double-acting control unit.

Before commissioning, all hydraulic connections should be checked in accordance with the operating instructions.

Adjusting the Sweeping Roller and Support Wheels

After assembly, the three continuously height-adjustable support wheels should be adjusted to match the work surface.

The lockable cranks allow you to secure the selected setting.

The position of the debris collection bin and, if applicable, the swivel angle of the chassis should also be adjusted to the specific working conditions.

Safety Note: Stones and other foreign objects may be thrown out during operation of the sweeper. The prescribed safety distances and all instructions in the operator’s manual must be observed.

JANSEN® – In-house development, master workshop, and spare parts supply

In addition to machines and attachments, JANSEN® also offers personal consultation, its own master workshop, and a long-term spare parts supply.

For technical questions, problems, or questions regarding commissioning, expert representatives are available by phone.

Many JANSEN® machines can be viewed in the showroom by prior appointment.

This way, customers benefit not only from a robust sweeper but also from expert support and a comprehensive range of services.

Frequently Asked Questions (FAQ) about the JANSEN® JK-200

1. For which vehicles is the JANSEN® JK-200 suitable?

The JANSEN® JK-200 features a Euro mount, a three-point hitch for Categories I and II, and a pallet fork mount. It is therefore suitable for appropriately equipped tractors, forklifts, wheel loaders, and Hoftracs. Mechanical compatibility and the required hydraulic supply must be checked before installation.

2. What hydraulic power does the JANSEN® JK-200 require?

To operate the hydraulic sweeper, a hydraulic oil flow rate of at least 20 liters per minute is required. The base machine can be operated with a double-acting control unit.

3. How wide is the sweeper, and how large is the debris hopper?

The JANSEN® JK-200 has a working width of 200 cm, a total width of 234 cm, and a sweeping roller with a diameter of 48 cm. The debris collection hopper holds approx. 160 liters, is made of 4 mm thick steel, and can be emptied hydraulically.

4. Can the JANSEN® JK-200 also be operated from the rear of the tractor?

Yes. Thanks to the three-point hitch for Categories I and II, the JK-200 can also be mounted to the rear hydraulics on compatible tractors. This allows for sweeping while driving forward. The chassis can also be manually swiveled 20° to the left and right and locked into place.

5. Is a side sweeper included, and how is the JK-200 shipped?

The hydraulic side sweeper is a separately available accessory and is not included in the standard scope of delivery. The JANSEN® JK-200 is delivered disassembled in a sturdy wooden crate. Allow approximately 1 to 2 hours for final assembly. Assembly by two people is recommended. A German operating manual and an exploded view diagram are included.