JANSEN® TS-22E Electric Log Splitter – 22 metric tons of splitting force, 110 cm & 400V

The JANSEN® TS-22E is a heavy-duty, robustly constructed electric log splitter with 22 metric tons of maximum splitting force and a maximum splitting length of 110 cm. The hydraulic pump is driven by a powerful 400V electric motor with 5 kW.

Thanks to its electric drive, the TS-22E operates relatively quietly and without a gasoline engine. Standard features include a practical log lifter, two different operating modes for the splitting wedge, and an adjustable cylinder stroke limiter.

Weighing approximately 315 kg, the TS-22E features a robust design. For transport or handling, the cylinder can be lowered to a height of approximately 1.88 m.

Key advantages

• Maximum splitting force of 22 metric tons
• Maximum splitting length of 110 cm
• 400V electric motor with 5 kW
• Quiet electric drive
• Log lifter included as standard
• Two different operating modes for the splitting wedge
• Adjustable cylinder stroke limit
• Forward stroke in approx. 8 seconds
• Return stroke in approx. 10 seconds
• 22 cm long splitting wedge
• Two wheels plus an additional transport wheel
• Cylinder can be lowered to approx. 1.88 m for transport and handling
• Solid construction with a net weight of approx. 315 kg
• Manufactured in accordance with EN 609:2017

22 metric tons of splitting force & 110 cm splitting length

The JANSEN® TS-22E achieves a maximum splitting force of 22 metric tons. The maximum splitting length is 110 cm, allowing for the processing of wood pieces of corresponding length.

When the cylinder is fully extended, the distance between the splitting wedge and the ground is approximately 20 cm. The splitting wedge itself is 22 cm long.

400V electric motor with 5 kW

The TS-22E’s hydraulic pump is driven by a 400V electric motor with 5 kW. This means the log splitter does not require a separate gasoline engine and operates more quietly as a result.

The electric model is therefore particularly well-suited for locations where a suitable 400V power supply is available.

Log lifter included as standard

The attached log lifter assists in raising and positioning heavy logs. This eliminates the need to lift large pieces of wood entirely by hand into the working position.

If the log lifter is not needed, it can be locked into the upper position, where it serves as a second safety bar.

Two operating modes for the splitting wedge

A simple spring mechanism on the JANSEN® TS-22E provides two different operating modes:

1. Automatic return:
After releasing the control levers, the splitting wedge automatically returns to the preset position. The return position can be infinitely adjusted using a lever. For this operating mode, the spring must be disengaged.

2. Splitting wedge remains in position:
After releasing the control levers, the splitting wedge remains in its current position. It only returns when the control lever is pushed upward. For this operating mode, the spring must be engaged.

This allows the operation to be adapted to different log lengths and working conditions.

Adjustable cylinder stroke limit

The cylinder stroke limit can be adjusted on the TS-22E . This allows the working stroke to be adjusted accordingly, for example, when splitting shorter pieces of wood.

The cylinder requires approximately 8 seconds for a full forward stroke. The return stroke takes approximately 10 seconds.

Transport & Lowered Cylinder

The log splitter stands on two wheels and also features a transport wheel. This allows the machine to be moved by hand at the work site.

Due to the machine’s weight of approximately 315 kg, care should be taken when moving the machine.

For transport and handling, the cylinder can be lowered with minimal effort to a height of approximately 1.88 m.

Safety & EN 609:2017

The JANSEN® TS-22E is manufactured and produced in accordance with the EU product safety standard EN 609:2017.

Important: A splitting cross is included in the scope of delivery. However, within the European Union, this must not be used when operating the log splitter, as EN 609:2017 does not permit the use of multiple splitting wedges or splitting crosses with log splitters.

Technical Specifications

• Model: JANSEN® TS-22E
• Type: upright electric log splitter
• Drive: 400V electric motor
• Motor power: 5 kW
• Splitting force: max. 22 metric tons
• Max. splitting length: 110 cm
• Log lifter: included
• Splitting wedge operating modes: 2
• Cylinder stroke limit: adjustable
• Distance from splitting wedge to the ground when cylinder is fully extended: approx. 20 cm
• Forward speed: approx. 8 seconds
• Reverse speed: approx. 10 seconds
• Splitting wedge length: 22 cm
• Weight: approx. 315 kg
• Max. assembled dimensions: approx. 130 x 145 x 247 cm (L x W x H)
• Min. assembled dimensions: approx. 130 x 96 x 247 cm (L x W x H)
• Cylinder can be lowered to a height of approx. 1.88 m for transport and handling
• Packaging dimensions: approx. 120 x 80 x 214 cm (L x W x H)
• Weight including packaging: approx. 345 kg
• Hydraulic oil capacity: approx. 24 liters
• Recommended hydraulic oil: HLP46

Scope of delivery

• JANSEN® TS-22E Electric Log Splitter
• 400V electric motor with 5 kW
• Log lifter
• Splitting wedge
• Splitting cross – not intended for use within the EU
• German operating instructions
• Exploded view

Delivery & Commissioning

The JANSEN® TS-22E is delivered well-protected and standing upright. Allow approximately 30 minutes for final assembly and commissioning.

A German user manual and an exploded view diagram are included in the scope of delivery. The hydraulic system requires approximately 24 liters of HLP46-rated hydraulic oil.

Note on the transport support: The transport support included with the delivery is intended solely to support the cylinder during shipping. It must be removed after the initial setup of the log splitter and replaced as specified—for example, with a suitable log.

Important Note Regarding the Product Video

The product video shows the JANSEN® TS-22 and not the TS-22E. The TS-22 shown in the video is powered by the PTO shaft of a tractor. The JANSEN® TS-22E offered here, on the other hand, features a 400V electric motor with 5 kW.

Service, Replacement Parts & Showroom

Even after your purchase, we’re here to personally assist you with any technical questions or issues. With our in-house master workshop and an extensive spare parts inventory, we provide you with a direct point of contact. We keep many spare parts in stock.

Our knowledgeable staff can also assist you with technical questions in person or by phone.

Many of our machines are set up and ready for operation in our showroom. You’re welcome to view and test the equipment on site.

Frequently Asked Questions (FAQ)

What is the splitting force of the JANSEN® TS-22E?

Answer: The log splitter achieves a maximum splitting force of 22 metric tons.

What is the maximum log length that can be processed?

Answer: The maximum splitting length of the TS-22E is 110 cm.

What type of drive does the TS-22E have?

Answer: The hydraulic pump is driven by a 400V electric motor with 5 kW.

Is a log lifter included with the unit?

Answer: Yes. The log lifter is standard equipment. If it is not needed, it can be locked into the upper position, where it serves as a second safety bar.

What operating modes does the splitting wedge offer?

Answer: The spring mechanism provides two operating modes. After releasing the control lever, the splitting wedge can either automatically retract to the preset position or remain in its current position.

Can the cylinder stroke be limited?

Answer: Yes. The cylinder stroke limit is adjustable and can be adapted, for example, to shorter pieces of wood.

How fast does the hydraulic cylinder operate?

Answer: The forward stroke takes approx. 8 seconds, the return stroke approx. 10 seconds.

How long is the splitting wedge?

Answer: The splitting wedge is approx. 22 cm long.

Can the cylinder be lowered for transport?

Answer: Yes. For transport and handling, the cylinder can be lowered to a height of approximately 1.88 m.

Can the included splitting cross be used?

Answer: Within the European Union, the included splitting cross must not be used when operating the log splitter. This is based on EN 609:2017 regarding multiple splitting wedges and splitting crosses.

How heavy is the TS-22E?

Answer: The log splitter weighs approximately 315 kg. The weight including packaging is approximately 345 kg.

What type of hydraulic oil is required?

Answer: The specified amount of hydraulic oil is approximately 24 liters. The hydraulic oil used is classified as HLP46.

How long does final assembly take?

Answer: You should allow approximately 30 minutes for final assembly and commissioning.

Does the product video show the TS-22E?

Answer: No. The video shows the JANSEN® TS-22 with PTO drive. The TS-22E offered here, on the other hand, is powered by a 400V electric motor with 5 kW.