JANSEN® TS-14L62 Tractor Log Splitter – 14 metric tons of splitting force, 54 cm, and 3-point hitch

The compact and robust JANSEN® TS-14L62 tractor log splitter delivers a splitting force of 14 metric tons and is powered directly by the hydraulic system of a suitable tractor, farm tractor, or other carrier vehicle. It is attached via the Category 1 or 2 three-point hitch.

With a maximum splitting length of 54 cm and a cylinder stroke of 50 cm, the log splitter is designed to process firewood of corresponding lengths. A special feature of the design: The wood is pressed against the fixed splitting wedge by the hydraulic cylinder.

The hydraulic hoses required for connection to the carrier vehicle are already included in the scope of delivery. A hydraulic supply and return line are required, whereby the return line must be pressure-free.

Key Advantages

• Splitting force of 14 metric tons
• Maximum splitting length of 54 cm
• Cylinder stroke of 50 cm
• Hydraulic drive via the carrier vehicle
• 3-point hitch, Cat. 1 and Cat. 2
• Mounting bolts included
• Hydraulic hoses for connection to the carrier vehicle included
• Splitting wedge included
• Removable splitting cross included
• Two-hand operation
• Forward stroke in approx. 9 seconds
• Return stroke in approx. 10 seconds
• Working height adjustable via the carrier vehicle’s 3-point hydraulic system
• Compact design with approx. 140 kg dry weight

14 metric tons of splitting force via the tractor’s hydraulic system

The JANSEN® TS-14L62 is powered by the hydraulic system of the carrier vehicle. At an oil pressure of approximately 180 bar, the wood splitter achieves a splitting force of 14 metric tons.

An oil flow rate of at least 26.0 l/min is required for operation. The maximum oil flow rate is 41.6 l/min.

A supply and return line are required for connection to the carrier vehicle. The return line must be pressureless. The corresponding hydraulic hoses for connection to the carrier vehicle are included in the scope of delivery.

3-point hitch for Categories 1 & 2

The log splitter can be connected to a suitable tractor via its Category 1 and Category 2 3-point hitch. The required hitch pins are included in the scope of delivery.

Another advantage of this design is the adjustable working height. Using the 3-point lift system of the towing vehicle, the log splitter can be raised to the desired working height.

54 cm splitting length & 50 cm cylinder stroke

The maximum splitting length of the JANSEN® TS-14L62 is 54 cm. At the same time, the hydraulic cylinder has a stroke of 50 cm.

The cylinder requires approximately 9 seconds for a full forward stroke. The full return stroke takes approximately 10 seconds.

The cylinder bore is 100 mm.

The wood is pressed against the splitting wedge

With the JANSEN® TS-14L62, the wood is pressed by the hydraulic cylinder against the fixed splitting wedge. After splitting, the split wood can fall down the back side.

If a piece of wood becomes wedged against the splitting wedge or splitting cross, the next piece of wood can be pushed against the previous piece during the subsequent operation, thereby freeing it.

Two-Hand Operation

The JANSEN® TS-14L62 is equipped with a two-hand control system. Both control elements are used to operate the splitting process as intended.

Technical Specifications

• Model: JANSEN® TS-14L62
• Drive: hydraulic via carrier vehicle
• Hydraulic system: 2-circuit
• Hydraulic connection: supply and return lines required
• Return line: depressurized required
• Hydraulic hoses for connection to the carrier vehicle: included
• Splitting force: 14 metric tons
• Oil pressure at 14 metric tons: approx. 180 bar
• Min. oil flow rate: 26.0 l/min
• Max. oil flow rate: 41.6 l/min
• Max. gap length: 540 mm / 54 cm
• Cylinder stroke: 50 cm
• Cylinder bore: 100 mm
• Cylinder forward stroke time: approx. 9 seconds
• Cylinder return stroke time: approx. 10 seconds
• Tractor attachment: Cat. 1 and Cat. 2
• Mounting bolts: included
• Operation: Two-hand control
• Splitting wedge: included
• Splitting cross: included, removable
• Dry weight: approx. 140 kg
• Packaging dimensions: approx. 1830 x 410 x 610 mm
• Weight including packaging: approx. 170 kg

Scope of delivery

• JANSEN® TS-14L62 Tractor Log Splitter
• Splitting wedge
• Removable splitting cross
• Hydraulic hoses for connection to the carrier vehicle
• Mounting bolts for 3-point hitch, Categories 1 and 2
• German operating instructions
• Exploded view

Delivery & Assembly

The JANSEN® TS-14L62 is delivered well-protected in a wooden crate. Allow approximately 30 minutes for assembly.

A German instruction manual and an exploded view are included with the log splitter. If you have any questions regarding installation or setup, we are happy to assist you.

Note regarding the product video

Please note: The product video shown features the previous model. Equipment details and design features of the currently available JANSEN® TS-14L62 may therefore differ from those shown in the video.

Service, Replacement Parts & Showroom

Even after your purchase, we’re here to personally assist you with any technical questions or issues. With our in-house master workshop and an extensive spare parts inventory, we provide you with a direct point of contact. We keep many spare parts in stock.

Our expert staff is also available to assist you with technical questions in person or by phone.

Many of our machines are set up and ready for operation in our showroom. You are welcome to view and test the equipment on site by appointment.

Frequently Asked Questions (FAQ)

What is the splitting force of the JANSEN® TS-14L62?

Answer: The log splitter achieves a splitting force of 14 metric tons. The specified oil pressure for this is approximately 180 bar.

How is the JANSEN® TS-14L62 powered?

Answer: It is powered by the hydraulic system of the tractor or carrier vehicle. A hydraulic forward and reverse line is required, with the return line being pressureless.

What hydraulic capacity does the carrier vehicle require?

Answer: The required oil flow rate is between 26.0 and 41.6 l/min. With a splitting force of 14 metric tons, an oil pressure of approximately 180 bar is specified.

Are the hydraulic hoses included in the scope of delivery?

Answer: Yes. The hydraulic hoses for connecting to the carrier vehicle are included in the scope of delivery.

Which 3-point hitch is the TS-14L62 compatible with?

Answer: The tractor log splitter features a mount for Category 1 and Category 2. The corresponding mounting bolts are included in the scope of delivery.

Can the working height be adjusted?

Answer: Yes. The log splitter can be adjusted to the desired working height using the tractor’s 3-point hitch.

What is the maximum log length that can be processed?

Answer: The maximum splitting length of the TS-14L62 is 54 cm. The cylinder has a stroke of 50 cm.

How fast does the hydraulic cylinder operate?

Answer: A full forward stroke takes approximately 9 seconds. The return stroke takes approximately 10 seconds.

How does the splitting mechanism of the TS-14L62 work?

Answer: The wood is pressed by the hydraulic cylinder against the fixed splitting wedge. The split wood can then fall out the back.

Is a splitting cross included in the package?

Answer: Yes. In addition to the splitting wedge, a removable splitting cross is also included.

How much does the TS-14L62 weigh?

Answer: The dry weight is approx. 140 kg. The weight including packaging is approx. 170 kg.

How long does assembly take?

Answer: You should plan on approx. 30 minutes for assembly.

Does the product video show the current model?

Answer: No. The product video shows the previous model. The model currently available may therefore differ in certain equipment and design details.