JANSEN® JSK-500 Log Splitter – 2,880 Nm Torque & MS-01 Mounting

The JANSEN® JSK-500 is a hydraulically driven log splitter for splitting wood with a maximum torque of 2,880 Nm. It is powered by the hydraulic system of a suitable carrier vehicle, such as a tractor, utility loader, or excavator.

The scope of delivery includes an MS-01 mounting bracket, which allows the JSK-500 to be mounted on suitable mini-excavators with a machine weight of up to 2 metric tons. In addition, various other mounting options are available as accessories.

The required operating pressure ranges from 180 to a maximum of 240 bar. An oil flow rate of at least 30 to a maximum of 75 liters is required for operation. Therefore, the compatibility of the host vehicle’s hydraulic system must be checked before use.

Key advantages

• Maximum torque of 2,880 Nm
• Hydraulic drive via a suitable carrier vehicle
• For tractors, farm loaders, excavators, and other suitable carrier vehicles
• MS-01 mounting bracket included in the scope of delivery
• MS-01 mounting bracket for suitable mini-excavators with a machine weight of up to 2 t
• Additional mounting options available as an option
• Operating pressure from 180 to a maximum of 240 bar
• Required oil flow rate from 30 to a maximum of 75 l/min.
• Robust construction
• Weight approx. 130 kg

Up to 2,880 Nm of torque

The JANSEN® JSK-500 achieves a maximum torque of 2,880 Nm. The cone is hydraulically driven and works its way into the wood during the rotational movement, thereby splitting the wood.

Power is supplied by the hydraulic system of the carrier vehicle. Operation therefore requires a suitable hydraulic system that meets the technical specifications of the JSK-500.

Hydraulic drive via the carrier vehicle

The JANSEN® JSK-500 does not have its own internal combustion or electric motor. It is driven by the hydraulic system of the respective carrier vehicle.

The required operating pressure ranges from a minimum of 180 to a maximum of 240 bar. The required oil flow rate is a minimum of 30 to a maximum of 75 liters per minute.

Before installation, you should therefore verify that the intended carrier vehicle meets the necessary hydraulic requirements.

MS-01 Mounting Bracket Included

The JANSEN® JSK-500 comes standard with an MS-01 mounting bracket. This allows for mounting on suitable mini-excavators with a machine weight of up to 2 metric tons.

The MS-01 mounting bracket allows the log splitter to be connected to a compatible carrier vehicle. Additionally, various other mounting options are available as optional extras for the JSK-500.

Hydraulic Connections

The hydraulic connections for the carrier vehicle are not included in the scope of delivery. The cone splitter’s existing hose connections feature a G 1/2" connection with a union nut.

When selecting the required connections and couplings, the specifications of the respective carrier vehicle must be taken into account.

For different carrier vehicles

The hydraulic drive allows the JSK-500 to be used on various suitable carrier vehicles. These include, among others:

• Mini excavators
• Excavators
• Yard loaders
• Tractors
• Other suitable hydraulic carrier vehicles

In addition to a suitable mechanical mounting, the available hydraulic pressure and oil flow rate of the respective carrier vehicle are particularly important.

Technical Specifications

• Model: JANSEN® JSK-500
• Equipment type: hydraulic log splitter
• Drive: Hydraulic via a suitable carrier vehicle
• Suitable carrier vehicles: e.g., tractor, farm loader, or excavator
• Torque: max. 2,880 Nm
• Operating pressure: min. 180 to max. 240 bar
• Required oil flow rate: min. 30 to max. 75 l/min.
• Mounting bracket: MS-01 included
• MS-01 bracket: for suitable mini-excavators with a machine weight up to 2 t
• Hose connections: G 1/2" with union nut
• Hydraulic connections for the carrier vehicle: not included
• Weight: approx. 130 kg
• Shipping weight: approx. 150 kg

Scope of delivery

• JANSEN® JSK-500 Cone Splitter
• MS-01 Mounting Bracket

Please note: The required hydraulic connections for the respective carrier vehicle are not included.

Check hydraulic specifications before purchasing

Since the JANSEN® JSK-500 is powered by the carrier vehicle’s hydraulic system, the technical specifications of the intended vehicle should be checked before purchasing.

An operating pressure of at least 180 to a maximum of 240 bar and an oil flow rate of at least 30 to a maximum of 75 l/min are required. In addition, the mechanical mounting and the hydraulic connections must be compatible with the respective carrier vehicle.

Service & Showroom

If you have technical questions or questions about the machine, our expert staff is available to assist you personally by phone.

Many of our machines are set up and ready for operation in our showroom. You are welcome to view the equipment on site by appointment.

Frequently Asked Questions (FAQ)

What is the torque of the JANSEN® JSK-500?

Answer: The cone splitter achieves a maximum torque of 2,880 Nm.

How is the JSK-500 powered?

Answer: The JSK-500 is powered by the hydraulic system of a suitable carrier vehicle, such as an excavator, farm loader, or tractor.

What hydraulic pressure does the cone splitter require?

Answer: The required operating pressure ranges from at least 180 to a maximum of 240 bar.

What oil flow rate is required?

Answer: Operation requires an oil flow rate of at least 30 to a maximum of 75 liters per minute.

Is an MS-01 mounting bracket included in the scope of delivery?

Answer: Yes. An MS-01 mounting bracket is included with the JANSEN® JSK-500.

For which mini excavators is the MS-01 mounting bracket intended?

Answer: The included MS-01 mounting bracket is designed for suitable mini excavators with a machine weight of up to 2 metric tons. Additionally, the mechanical and hydraulic specifications of the respective carrier vehicle must be compatible.

Can the JSK-500 also be used on other carrier vehicles?

Answer: Yes. The hydraulic drive generally allows for use on various suitable carrier vehicles such as tractors, farm loaders, or excavators. Depending on the vehicle, different or optional mounting options may be required.

Are other mounting options available?

Answer: Yes. Various optional mounting options are available for the JANSEN® JSK-500.

Are the hydraulic connections for the carrier vehicle included?

Answer: No. The required hydraulic connections for the carrier vehicle are not included in the scope of delivery.

What connections does the log splitter have?

Answer: The hose connections on the JSK-500 feature a G 1/2" connection with a union nut.

Does the JSK-500 have its own motor?

Answer: No. The cone splitter does not have its own internal combustion or electric motor. The required drive power is provided by the carrier vehicle’s hydraulic system.

How much does the JANSEN® JSK-500 weigh?

Answer: The unit weighs approximately 130 kg. The specified shipping weight is approximately 150 kg.

What should be checked before purchasing?

Answer: Before purchasing, you should specifically check the mechanical mounting, hydraulic pressure, oil flow rate, and required hydraulic connections of the intended carrier vehicle.