DIRECTIONS
Open HoursMON to THU:
8:00 am to 5:00 pm
FRI:
8:00 am to 4:00 pm

JANSEN® HS-22A62E Log Splitter, Electric Motor, 22 metric tons, 62 cm, Vertical + Horizontal

item number: 1325104
€1,699.00  

Prices incl. VAT, plus shipping costs

Availability

Mid October


Shipping costs:
Watch product video
Average Rating (8)
From Jörg Cordes 28/09/2024 15:11

Gutes, solides Gerät  

Donnerstag bestellt, montags drauf steht die Kiste auf dem Hof! Auspacken und zusammen bauen sind auch alleine eigentlich kein Problem, einzig bei der Hochzeit zwischen Deichsel und dem Spalter an sich ist eine... continue reading

From Jörg Cordes 27/09/2024 16:06

Gutes, solides Gerät  

Donnerstag bestellt, montags drauf steht die Kiste auf dem Hof! Auspacken und zusammen bauen sind auch alleine eigentlich kein Problem, einzig bei der Hochzeit zwischen Deichsel und dem Spalter an sich ist eine... continue reading

From Michael Rohr 23/03/2023 07:44

So kann es weiter gehen...  

Moin, Lieferung: ich habe den Spalter am letzten Freitag bestellt, am darauffolgenden Dienstag wurde er mir per Spedition zugestellt... so schnell hatte ich damit nicht gerechnet. Wenn man was schlechtes finden... continue reading

From Arnold Bouillon 03/01/2022 19:53

Super Gerät!  

Der Zusammenbau war mit Hilfe meines Nachbarn und dessen Flaschenzug, wie beschrieben, einfach und schnell erledigt. Probespaltungen wetterbedingt 3 Tage später an Eichenholzklötzen vom letzten Jahr. Einwandfrei. Seit... continue reading

From Lüttgen 26/02/2021 09:41

ZUSAMMEN MIT ZWEI LEUTEN HAT REIBUNGSLOS GEKLAPPT. Motor sofort angesprungen,das spalten war eine wohltat  

tippi toppi der gerät

From Heiner Tödter 25/09/2019 08:51

Tolles Teil  

Den Holzspalter habe ich direkt am Lager abgeholt. Vorher konnte ich ihn mit einem von mir mitgebrachten Holzstück ausprobieren. Der Spalten ging durch , wie durch Butter. Beratung und Verkauf liefen einwandfrei. Beim... continue reading

From Rinsche Siegfried 03/03/2015 20:32

Preiswert  

Mit der Kaufabwicklung bin ich sehr zufrieden! Hat alles gut geklappt. Die Funktion entspricht vollständig der Beschreibung! Spaltergebniss hervorragend ! Zwei Dinge sind zu bemängeln 1. Die Bedienhebel sind nur... continue reading

From Torsten Kretschmer 11/10/2014 21:21

Ist soweit ok. Nur der schnelle Rost in dem Kastenprofil nach einigen Wochen ist natürlich nicht so schön...  

Also mein vor einigen Wochen erworbene Holzspalter beginnt schon im Inneren der Kastenprofile zu rosten.... Das sagt wohl einiges über die Verarbeitung. Die Montageanleitung ist super und mit 2-2,5 Stunden hatte ich... continue reading

JANSEN® HS-22A62E Electric Log Splitter – 22 metric tons of splitting force, 62 cm & 400V

The JANSEN® HS-22A62E is a heavy-duty, robustly built electric log splitter with 22 metric tons of measured splitting force and a maximum splitting length of 62 cm. The hydraulic system is powered by a 2.2 kW 400V electric motor (16 A).

The electric motor and hydraulic pump are designed to work in harmony, enabling high hydraulic splitting performance despite the motor’s comparatively modest power output. At the same time, the electric drive allows for quieter operation compared to the gasoline-powered version.

A key advantage of the HS-22A62E is its flexible operation: The log splitter can be operated both in an upright position and in a horizontal position. This allows the working position to be adapted to the wood being processed and the specific work situation.

The splitting force of our log splitters is measured directly at the splitting wedge. The specified 22 metric tons therefore corresponds to the splitting force actually measured there.


Key Advantages

  • 22 metric tons of measured splitting force
  • Maximum splitting length of 62 cm
  • Can be used in both upright and horizontal positions
  • 400V electric motor with 2.2 kW / 16 A
  • Quieter operation compared to the gasoline model
  • 30 cm long splitting wedge
  • 30 cm long splitting cross included in the scope of delivery
  • Splitting wedge can be locked in various positions
  • Forward and reverse movement possible from any position
  • Towing bar and hitch for maneuvering and transport at the job site
  • Overall width of approx. 106 cm
  • Robust construction weighing approx. 300 kg without fluids

22 metric tons measured splitting force

The JANSEN® HS-22A62E achieves a splitting force of 22 metric tons. The measurement is taken directly at the splitting wedge and thus reflects the actual splitting force applied there.

The maximum splitting length is 62 cm. Combined with the 30 cm-long splitting wedge and the robust hydraulic system, the wood splitter is designed to process firewood of this length.


Splitting in an upright or horizontal position

The HS-22A62E can be operated both in an upright position and in a horizontal position. This provides two different working positions.

In the upright position, the dimensions are approximately 218 x 106 x 182 cm. In the horizontal position, the log splitter measures approx. 220 x 106 x 128 cm.

With a total width of approx. 106 cm, the log splitter can also be transported on a suitable trailer.


400V electric motor with 2.2 kW

The hydraulic pump of the JANSEN® HS-22A62E is driven by a 400V electric motor with 2.2 kW. A corresponding 16-A power supply is required for connection.

The coordination between the electric motor and the hydraulic pump enables a high hydraulic splitting force of 22 metric tons. At the same time, the electric drive offers quieter operation compared to a gasoline engine.


30 cm Splitting Wedge & Splitting Cross

The HS-22A62E is equipped with a 30 cm long splitting wedge. Additionally, a 30 cm long splitting cross is included in the scope of delivery.

The splitting cross is slid over the existing splitting wedge, allowing for a quick switch between the splitting wedge and the splitting cross.

When using the splitting cross, please note that the log diameters that can be processed may be smaller than when working with the standard splitting wedge.


Flexibly Controllable Hydraulics

The hydraulic system of the JANSEN® HS-22A62E allows the splitting wedge to be stopped in various positions. From there, it can be moved either forward or backward as desired.

This means that, for example, when working with shorter pieces of wood, the splitting wedge does not need to be fully retracted to its starting position after every work cycle. Unnecessary idle travel can thus be reduced.

A full downward stroke of the cylinder is specified to take approximately 8 seconds.


Transport & Maneuvering

The HS-22A62E features a towing drawbar and hitch, allowing it to be moved and maneuvered at the job site. The maximum specified towing speed is 25 km/h.

Please note: The log splitter is not street-legal and therefore must not be towed behind a passenger car on public roads in Germany.

For transport on public roads, the machine can, for example, be loaded onto a suitable trailer using appropriate ramps and secured accordingly.


Technical Specifications

  • Model: JANSEN® HS-22A62E
  • Type: Electric log splitter
  • Operating position: upright or horizontal
  • Splitting force: 22 metric tons (measured value)
  • Max. splitting length: 62 cm
  • Electric motor: 400 V / 2.2 kW / 16 A
  • Cylinder downward speed: approx. 8 seconds
  • Cylinder diameter: 115 mm
  • Piston rod diameter: 45 mm
  • Splitting wedge: 30 cm long, included
  • Splitting cross: 30 cm long, included
  • Max. Towing Speed: 25 km/h
  • Weight: approx. 300 kg without fluids
  • Dimensions (upright): approx. 218 x 106 x 182 cm (L x W x H)
  • Dimensions when laid flat: approx. 220 x 106 x 128 cm (L x W x H)
  • Packaging dimensions: approx. 191 x 50 x 66 cm (L x W x H)
  • Hydraulic oil capacity: approx. 9.5 liters
  • Recommended hydraulic oil: HLP46

What’s Included

  • JANSEN® HS-22A62E Electric Log Splitter
  • 400V electric motor with 2.2 kW
  • 30 cm long splitting wedge
  • 30 cm long splitting crossbar
  • Drawbar and hitch
  • German operating instructions
  • Exploded view diagrams

Delivery & Commissioning

The JANSEN® HS-22A62E is delivered well-protected and partially disassembled in a wooden crate. Allow approximately 3–4 hours for final assembly.

Due to the weight of the individual components, assembly should be performed by at least two people. A German operating manual and exploded view diagrams are included with the delivery.

Approx. 9.5 liters of hydraulic oil are additionally required for the initial fill.HLP46 hydraulic oil is recommended.


Service, Replacement Parts & Exhibition

Even after your purchase, we are here to personally assist you with any technical questions or issues. With our in-house master workshop and an extensive spare parts inventory, we provide you with a direct point of contact. We have many spare parts in stock.

Our expert staff is also available to assist you with technical questions personally by phone.

Many of our machines are set up and ready for operation in our showroom. You are welcome to view and test the equipment on-site by scheduling an appointment in advance.


Frequently Asked Questions (FAQ)

What is the splitting force of the JANSEN® HS-22A62E?

Answer: The log splitter achieves a splitting force of 22 metric tons, measured directly at the splitting wedge.

What is the maximum log length that can be processed?

Answer: The maximum splitting length is 62 cm.

Can the HS-22A62E be operated in both vertical and horizontal positions?

Answer: Yes. The JANSEN® HS-22A62E is designed for both upright and horizontal splitting operations.

What power connection does the HS-22A62E require?

Answer: The log splitter is equipped with a 2.2 kW, 400V electric motor. A 16 A connection is specified.

How fast does the cylinder operate?

Answer: A full downward stroke of the cylinder takes approximately 8 seconds.

How long is the splitting wedge?

Answer: The standard splitting wedge is 30 cm long.

Is a splitting cross included in the package?

Answer: Yes. A 30 cm-long splitting cross is included in the package and can be slid over the existing splitting wedge.

Are there any restrictions when working with the splitting cross?

Answer: When using the splitting cross, please note that the log diameters that can be processed may be smaller than when working with the standard splitting wedge.

Does the splitting wedge have to retract completely after each operation?

Answer: No. The hydraulic system allows the splitting wedge to be stopped in various positions and moved forward or backward from there.

Is the HS-22A62E street-legal?

Answer: No. The log splitter is not street-legal and may therefore not be towed behind a passenger car on public roads in Germany.

How much does the HS-22A62E weigh?

Answer: The weight is approximately 300 kg without fluids.

What type of hydraulic oil is required?

Answer: For the initial fill, approximately 9.5 liters of HLP46-rated hydraulic oil are required.

How long does final assembly take?

Answer: You should plan on approximately 3–4 hours for final assembly. Due to the heavy individual parts, assembly should be performed by at least two people.

Internal item#: 1020840414

Read, write and discuss reviews... more
Write a review:
Evaluations will be activated after verification.
Please enter these characters in the following text field.

** = required field

I have read the data protection information.

Customer evaluation for "JANSEN® HS-22A62E Log Splitter, Electric Motor, 22 metric tons, 62 cm, Vertical + Horizontal"
28 Sep 2024

Gutes, solides Gerät

Donnerstag bestellt, montags drauf steht die Kiste auf dem Hof!
Auspacken und zusammen bauen sind auch alleine eigentlich kein Problem, einzig bei der Hochzeit zwischen Deichsel und dem Spalter an sich ist eine helfende Hand für das Einbringen des Bolzens nicht schlecht. Auf ebenem Untergrund ist das händische Rangieren etwas Mühsam, aber es geht. Die Verarbeitung einschließlich der Lackierung machen einen guten Eindruck.
Weil ich ja wissen wollte was das Ding so kann, bin ich mit 10 Jahre abgelagerter knorriger, beasteter Eiche angefangen. An den Stammdurchmesser von über 60 cm habe ich mich mit der Axt nämlich nie ran getraut.
Was soll ich jetzt groß schreiben? Er kann!
Das Handling ist einwandfrei, er läßt sich in jeder Position anhalten und kann alleine zurückfahren während man das neue Stück Holz schon wieder einlegen kann. Ich bin zwar neu im „Spaltergeschäft“, aber für mich ist das Teil tip, topp und das Geld absolut wert.

27 Sep 2024

Gutes, solides Gerät

Donnerstag bestellt, montags drauf steht die Kiste auf dem Hof!
Auspacken und zusammen bauen sind auch alleine eigentlich kein Problem, einzig bei der Hochzeit zwischen Deichsel und dem Spalter an sich ist eine helfende Hand für das Einbringen des Bolzens nicht schlecht. Auf ebenem Untergrund ist das händische Rangieren etwas Mühsam, aber es geht. Die Verarbeitung einschließlich der Lackierung machen einen guten Eindruck.
Weil ich ja wissen wollte was das Ding so kann, bin ich mit 10 Jahre abgelagerter knorriger, beasteter Eiche angefangen. An den Stammdurchmesser von über 60 cm habe ich mich mit der Axt nämlich nie ran getraut.
Was soll ich jetzt groß schreiben? Er kann!
Das Handling ist einwandfrei, er läßt sich in jeder Position anhalten und kann alleine zurückfahren während man das neue Stück Holz schon wieder einlegen kann. Ich bin zwar neu im „Spaltergeschäft“, aber für mich ist das Teil tip, topp und das Geld absolut wert.

23 Mar 2023

So kann es weiter gehen...

Moin,

Lieferung: ich habe den Spalter am letzten Freitag bestellt, am darauffolgenden Dienstag wurde er mir per Spedition zugestellt... so schnell hatte ich damit nicht gerechnet. Wenn man was schlechtes finden möchte, wäre das einzige vielleicht, dass die Spedition vorher nicht angerufen hat, wie angekündigt.

Montage: Die Montage ist einfach. Ich habe mit meinem Sohn da ca. 2 Stunden für gebraucht. Als Hinweis... sobald man die Stopfen von den Ölschläuchen nimmt, fließt ein wenig Restöl heraus, entweder man darf nicht empfindlich sein, oder man sollte dringend etwas darunter legen.
Spalten: darüber kann ich noch nicht viel sagen, aber es funktioniert. Als Vorteile zu meinem bisherigen Spalter kann ich sagen: Der Spaltkeil fährt sehr weit bis an die Fußplatte heran. Ich kann den Spaltkeil an jeder Stelle anhalten.

3 Jan 2022

Super Gerät!

Der Zusammenbau war mit Hilfe meines Nachbarn und dessen Flaschenzug, wie beschrieben, einfach und schnell erledigt. Probespaltungen wetterbedingt 3 Tage später an Eichenholzklötzen vom letzten Jahr. Einwandfrei. Seit heute (3.2.22) ist es jetzt ernst geworden. Frisch geschlagene Buchenstücke, Durchmesser 60 bis 100 cm und 30 bis 33cm hoch, rangerollt und auf Plattform gewuchtet. Dauert etwa 30 min bis so eine Scheibe in kamintaugliche Stücke gespalten ist. Mit der Axt brauchte ich dafür früher gerne bis zu 2 Stunden, wenn überhaupt. In einigen Scheiben waren Äste drin, die ich mit der Axt nicht hätte spalten können. Mit dem Spalter ging das problemlos. Meine Frau und ich sind restlos begeistert.

26 Feb 2021

ZUSAMMEN MIT ZWEI LEUTEN HAT REIBUNGSLOS GEKLAPPT. Motor sofort angesprungen,das spalten war eine wohltat

tippi toppi der gerät

25 Sep 2019

Tolles Teil

Den Holzspalter habe ich direkt am Lager abgeholt. Vorher konnte ich ihn mit einem von mir mitgebrachten Holzstück ausprobieren. Der Spalten ging durch , wie durch Butter. Beratung und Verkauf liefen einwandfrei. Beim ersten Einsatz im sehr harten Buchenholz hat sich leider der Spaltkeil leicht verbogen. Nach einem Anruf ist mir ein neuer Spaltkeil unkompliziert zugeschickt worden. Toller Service. Danke. Den Holzspalter kann ich nur weiterempfehlen. Danke liebes Jansen-Team

3 Mar 2015

Preiswert

Mit der Kaufabwicklung bin ich sehr zufrieden! Hat alles gut geklappt.
Die Funktion entspricht vollständig der Beschreibung! Spaltergebniss hervorragend ! Zwei Dinge sind zu bemängeln 1. Die Bedienhebel sind nur über eine Hydraulikleitung mit der Maschine verbunden hier muss nachgebessert werden. 2. Die Hydraulikleitungen vom Ventil zum Motor und zum Tank sind nicht ausreichend sicher zu verlegen. Hier fehlt ein vorgegebener Leitungsweg der auch eine sichere Verlegung ermöglicht!

11 Oct 2014

Ist soweit ok. Nur der schnelle Rost in dem Kastenprofil nach einigen Wochen ist natürlich nicht so schön...

Also mein vor einigen Wochen erworbene Holzspalter beginnt schon im Inneren der Kastenprofile zu rosten.... Das sagt wohl einiges über die Verarbeitung. Die Montageanleitung ist super und mit 2-2,5 Stunden hatte ich das Gerät montiert. Ob es wirklich 22t schafft.. das muß ich noch einmal genauer untersuchen lassen. Für das Geld ist es jedenfalls ok.

Verification of the authenticity of customer reviews

Every consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed.
Previously viewed items
scroll up call directly