DIRECTIONS
Open HoursMON to THU:
8:00 am to 5:00 pm
FRI:
8:00 am to 4:00 pm

JANSEN® BHSM-225 Backhoe, including 400 mm bucket, attachment excavator, excavator

item number: 1325119
€5,890.00  

Prices incl. VAT, plus shipping costs

Availability

Item in stock1


Shipping costs:
Add accessories to your order
Excavator Thumb Jansen BHM / BHSM
Excavator Thumb Jansen BHM / BHSM
€169.00  
400mm Bucket Jansen BHM / BHSM
400mm Bucket Jansen BHM / BHSM
€319.00  
900mm Bucket Jansen BHM / BHSM
900mm Bucket Jansen BHM / BHSM
€379.00  
260mm Bucket Jansen BHM / BHSM
260mm Bucket Jansen BHM / BHSM
€289.00  
500 mm Bucket Jansen BHM / BHSM
500 mm Bucket Jansen BHM / BHSM
€339.00  
Watch product video
Average Rating (5)
From Adolf Öckmayer 12/03/2026 15:59

Bin sehr zufrieden.  

Sehr gute Qualität(Lackierung, Schweißnähte) und robuste Konstruktion. Weiters sind das professionelle Kundenservice und vernünftige Preise hervorzuheben.

From Albert Ollinger 01/05/2020 16:44

Habe den Bagger jetzt schon 6 -7 Jahre doch jetzt haben wir eine Baustelle ca.650 Kubikmeter Erdreich wirklich schwerer Boden ausgehoben .Angebaut ist der bagger am 5506 Deutz der im Standgas mit 1000 er Zapfwelle das Gerät bei Laune hält. Das Preis- Lei  

Die Seitenverschiebung ist etwas gewöhnungsbedürftig . Ansonsten gutes Gerät .

From Frank Meyer 18/12/2019 17:12

Robuster Bagger !  

Nach anfänglichen kleineren Mängeln, welche aber sofort behoben wurden, bin ich mit dem robusten Bagger sehr zufrieden! Der telefonische Service verdient grosses Lob !

From Simon 21/05/2018 11:49

Ein TOP Gerät!  

Ich habe mir diesen Bagger gekauft, da bei uns im Außenbereich der Breitbandausbau (Glasfaser) beginnt und wir viel in Eigenleistung machen müssen. Zum Beispiel Kopflöcher graben, vorhandene Erdleitungen freilegen die... continue reading

From Dirk Lohrstedt 02/02/2016 10:43

Kraftprotz!  

der bagger an meinem IHC 946AS macht das was er soll. sauber verarbeitet, verständlich in der handhabung und kraft pur. habe mir gleich den daumen und eine größere schaufel mitbestellt. danke an dieser stelle für das... continue reading

JANSEN® BHSM-225 – Rear loader for tractors with side shift and 400 mm bucket

The JANSEN® BHSM-225 is a robust rear loader or mounted loader for tractors. It is attached to the tractor via the three-point hitch and driven directly by the PTO shaft. Thanks to its own hydraulic system, the rear loader requires only PTO power from the tractor.

With a digging depth of 2250 mm, a side shift of 960 mm, and a swing range of 180 degrees, the JANSEN® BHSM-225 offers a large working area. The excavator arm’s lateral offset is particularly advantageous when digging along house walls or excavating strip foundations.

The rear excavator comes standard with a 400 mm wide excavator bucket. The bucket force is 1,700 kg. A tractor with an engine power of at least 45–50 PS is recommended for operation.


The key advantages of the JANSEN® BHSM-225 at a glance

  • 2,250 mm digging depth: For a variety of excavation and digging tasks.
  • 960 mm side shift: Enables off-center work, such as along house walls.
  • 180-degree swivel range: Wide lateral working range of the excavator arm.
  • 400 mm bucket included: The rear excavator comes standard with a matching excavator bucket.
  • 1,700 kg bucket force: Robust design for demanding excavation work.
  • Separate hydraulic system: Power is supplied via the tractor’s PTO.
  • Cat. I and II three-point hitch: For tractors with a compatible hitch.
  • Hydraulic stabilizers: Extendable stabilizers increase stability during operation.
  • Cross-control: Operation of the rear excavator via a cross-control lever.
  • Optional accessories: Additional bucket widths and an excavator thumb are available.

Rear excavator with its own hydraulic system and PTO drive

The JANSEN® BHSM-225 is mounted via the tractor’s three-point hitch. The hitch is designed for Category I and Category II.

A major advantage of the rear loader is its independent hydraulic system. It is driven by the tractor’s PTO, so no additional power from the tractor’s hydraulic system is required.

The required PTO shaft is already included in the scope of delivery. The specified PTO speed is 540 rpm.

For operation, the tractor should have a power output of at least 45–50 PS.


960 mm side shift – Flexible operation along house walls

The key difference between the JANSEN® rear excavators of the BHM and BHSM series is the additional side shift of the excavator arm.

On the JANSEN® BHSM-225, the excavator arm can be shifted laterally by 960 mm. This expands the working range compared to the standard BHM versions.

This feature is particularly helpful when excavation work is not to be performed directly behind the tractor.

Excavating strip foundations

Thanks to the lateral movement of the excavator arm, for example, strip foundations can be excavated directly along house walls.

The tractor does not need to be positioned directly over the area to be excavated. Instead, the excavator arm can be used in an offset position.

Combined with the 180-degree swivel range, the rear excavator offers a versatile operating radius.


225 cm digging depth and 1,700 kg bucket force

With a digging depth of 2,250 mm, the JANSEN® BHSM-225 is suitable for a variety of earthmoving and excavation tasks.

The standard 400 mm excavator bucket enables precise digging. The specified bucket force of 1,700 kg underscores the robust design of the skid-steer loader.

The excavator arm has a swing range of 180 degrees. The bucket’s opening angle is 203 degrees.

The maximum dumping height is 2300 mm.

JANSEN® BHSM-225 – Dimensional drawing with overall length 3300 mm, digging depth 2250 mm, and height 3450 mm


Hydraulic stabilizers for greater stability

During operation, the hydraulic outriggers can be extended to increase the stability of the backhoe.

The outrigger width is 1,440 mm.

Stable support is particularly important during excavation work, when greater forces act on the excavator arm.

The JANSEN® BHSM-225 is operated via a cross-control.


Versatile Applications of the JANSEN® BHSM-225

The rear excavator is suitable for various excavation tasks and expands a tractor’s capabilities to include an excavator function.

Excavation and digging

With a digging depth of 2250 mm and the standard 400 mm bucket, a variety of excavation tasks can be performed.

Strip foundations along house walls

The 960 mm side shift enables offset operation and is particularly helpful when excavating strip foundations directly along house walls.

Working with Different Bucket Widths

Additional buckets are available as options to meet various requirements. This allows the rear excavator to be adapted to various excavation tasks.


Optional accessories for the JANSEN® BHSM-225

Various accessories are available for the JANSEN® BHSM-225, which expand the rear excavator’s range of applications.

  • 260 mm bucket: Optionally available narrow excavator bucket.
  • 500 mm bucket: Optionally available excavator bucket with a larger working width.
  • 900 mm trench-clearing bucket without teeth: For corresponding clearing work.
  • Excavator thumb: A practical accessory for lifting tree trunks, rocks, slabs, and similar objects.

Note: These accessories are available as options and are not included in the standard scope of delivery.


Technical Specifications of the JANSEN® BHSM-225

  • Model: JANSEN® BHSM-225
  • Part Number: 1325119
  • Mount: Cat. I and Cat. II
  • Overall length: 3300 mm
  • Digging depth: 2250 mm
  • Support width: 1440 mm
  • Height: Max. 3,450 mm
  • Dump height: Max. 2,300 mm
  • Swing radius: 180 degrees
  • Side shift: 960 mm
  • Bucket opening angle: 203 degrees
  • Bucket force: 1,700 kg
  • PTO speed: 540 rpm
  • PTO: Included
  • Hydraulic pressure: 160 bar
  • Flow rate: 40 L/min
  • Weight: Approx. 840 kg
  • Weight with packaging: Approx. 875 kg
  • Packaging dimensions (L × W × H): 1600 × 1200 × 2300 mm

Scope of delivery

The JANSEN® BHSM-225 comes standard with the following components:

  • JANSEN® BHSM-225 Rear Loader
  • 400 mm Loader Bucket
  • PTO Shaft

Other bucket widths and the loader thumb are available as options.


Delivery & Commissioning

The JANSEN® BHSM-225 is delivered well-packaged in a sturdy steel frame.

Final Assembly

You should plan on approximately 1.5 hours for final assembly.

Assembly is generally straightforward. However, we recommend that the assembly be performed by two people.

Required Operating Fluids

The following operating fluids are required before commissioning:

  • Grease: For lubricating the rear excavator.
  • Hydraulic oil: Approx. 20–30 liters.
  • Recommended hydraulic oil grade: HLP46.

Please take these specifications into account when preparing for initial startup.

If you have any questions or issues, the JANSEN® team will be happy to assist you by phone.


JANSEN® – In-house Development, Master Workshop, and Spare Parts Supply

We developed the JANSEN® rear excavators ourselves. In addition to sales, we offer expert service through our in-house master workshop as well as a comprehensive supply of replacement parts.

We typically have every replacement part in stock and are also available to assist you personally with technical questions or issues.

With us, you speak directly with knowledgeable representatives—not an anonymous call center.

You’re welcome to get a firsthand look at our machines before making a purchase. We recommend an on-site visit or a consultation over the phone.


Frequently Asked Questions (FAQ) about the JANSEN® BHSM-225

1. What tractor power is required for the JANSEN® BHSM-225?

To operate the JANSEN® BHSM-225, your tractor should have an engine power of at least 45–50 PS. The rear loader is attached via a Category I or II three-point hitch and driven by the PTO.

2. Does the rear loader require a hydraulic connection on the tractor?

No. The JANSEN® BHSM-225 has its own hydraulic system, which is driven by the tractor’s PTO. Therefore, the tractor simply needs to be equipped with the appropriate PTO drive. The required PTO shaft is included in the scope of delivery.

3. How deep can the JANSEN® BHSM-225 dig?

The digging depth is 2250 mm (225 cm). The rear excavator also has a swivel range of 180 degrees and a side shift of 960 mm.

4. Which bucket is included, and are there any other accessories?

The rear loader comes standard with a 400 mm wide excavator bucket. Optional buckets with 260 mm and 500 mm widths as well as a 900 mm trench-clearing bucket without teeth are available. Additionally, an excavator grapple is available, which can be used to lift tree trunks, stones, or slabs, for example.

5. How is the rear excavator shipped, and what type of hydraulic oil is required?

The JANSEN® BHSM-225 is shipped in a sturdy steel frame. Allow approximately 1.5 hours for final assembly. We recommend that two people perform the assembly. For commissioning, you will need grease and approximately 20–30 liters of hydraulic oil. We recommend HLP46 hydraulic oil.

Internal item#: 1009801745

Read, write and discuss reviews... more
Write a review:
Evaluations will be activated after verification.
Please enter these characters in the following text field.

** = required field

I have read the data protection information.

Customer evaluation for "JANSEN® BHSM-225 Backhoe, including 400 mm bucket, attachment excavator, excavator"
12 Mar 2026

Bin sehr zufrieden.

Sehr gute Qualität(Lackierung, Schweißnähte) und robuste Konstruktion. Weiters sind das professionelle Kundenservice und vernünftige Preise hervorzuheben.

1 May 2020

Habe den Bagger jetzt schon 6 -7 Jahre doch jetzt haben wir eine Baustelle ca.650 Kubikmeter Erdreich wirklich schwerer Boden ausgehoben .Angebaut ist der bagger am 5506 Deutz der im Standgas mit 1000 er Zapfwelle das Gerät bei Laune hält. Das Preis- Lei

Die Seitenverschiebung ist etwas gewöhnungsbedürftig . Ansonsten gutes Gerät .

18 Dec 2019

Robuster Bagger !

Nach anfänglichen kleineren Mängeln, welche aber sofort behoben wurden, bin ich mit dem robusten Bagger sehr zufrieden!
Der telefonische Service verdient grosses Lob !

21 May 2018

Ein TOP Gerät!

Ich habe mir diesen Bagger gekauft, da bei uns im Außenbereich der Breitbandausbau (Glasfaser) beginnt und wir viel in Eigenleistung machen müssen. Zum Beispiel Kopflöcher graben, vorhandene Erdleitungen freilegen die man mit der Glasfaserleitung kreuzt etc...

Wir haben den Bagger hinter unserem IHC 724-S (68 PS) hängen und er macht damit eine Top Figur. Ein Frontlader dient als Gegengewicht und es ist somit ein Top Gespann.

Der Anbau und Inbetriebnahme war mit der bebilderten Anleitung absolut kein Problem. Die Anleitung ist sehr durchdacht und man hat auch ein Wartungsplan und Explosionszeichnungen für Ersatzteile mit dabei.

Dieser Bagger macht vor nichts halt und hat sogar soviel Power, dass dieser, trotz angezogener Handbremse, den Trecker von der Stelle zieht wenn mal eine Wurzel kommt. Dicke Steine oder Faustdicke Wurzeln sind für den Bagger absolut kein Problem. Diese werden einfach aus dem Weg geräumt. Gearbeitet habe ich bis jetzt nur mit der 400mm Tiefenschaufel die super für den Bagger geeignet ist.

Alles in allem macht der Bagger eine TOP Figur und ich kann ihn einfach nur empfehlen.

Es ist alles sehr robust gebaut und die Schweißnähte sehen alle wunderbar aus. Auch die Lackierung ist schön gleichmäßig und vor allem dick, was für so ein Gerät mit solchen Arbeitsbedingungen sehr vom Vorteil ist. Auch die Seitenverschiebung bei dem BHSM ist sehr robust und es ist absolut nichts billig verarbeitet.

Der Service ist auch absolut spitzenmäßig. Wenn man mal eine Frage hat wird diese, auch Sonntags, via email beantwortet. Und mit diesen Antworten kann man vor allem auch etwas anfangen.
Es ist einfach ein Zeichen für einen super Service und ich kann es nur weiter empfehlen!





2 Feb 2016

Kraftprotz!

der bagger an meinem IHC 946AS macht das was er soll. sauber verarbeitet, verständlich in der handhabung und kraft pur. habe mir gleich den daumen und eine größere schaufel mitbestellt. danke an dieser stelle für das entgegenkommen bei der fracht. anfängliche verständnisprobleme bei der seitenverschiebung wurden in einem telefonat verständlich geklärt.
1 stern abzug, weil das hydrauliköl nicht mitgeliefert werden durfte. ist aber ein speditions- und kein jansen-problem :)

Verification of the authenticity of customer reviews

Every consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed.
Previously viewed items
scroll up call directly