JANSEN® BHSM-175 Rear-Mounted Excavator, including 300 mm bucket, attachment excavator, excavator
Top Gerät
Der BHSM 175 ist ein sehr schöner und leistungsstarker Heckbagger. Beim aufbau gab es keinerlei Probleme. Ich nutze in mit meinem MF 25 (27 PS) und kann den Bagger und die Firma Jansen nur weiter empfehlen.
....tolles Gerät
....auf der Suche nach einem Bagger als Anbaugerät für meinen kleinen Unimog U411 mit 32 PS hab ich diesen Händler und diese Maschine gefunden. Eurosteuerung und eigene Hydraulik über Zapfwelle so wie ein sehr offenes... continue reading
JANSEN® BHSM-175 – Rear loader for tractors with side shift and a 300 mm bucket
The JANSEN® BHSM-175 is a robust rear loader or mounted loader for tractors. It is attached to the tractor via the three-point hitch and driven directly by the PTO shaft. Thanks to its own hydraulic system, the rear loader requires only PTO drive from the tractor.
With a digging depth of over 1750 mm, a side shift of 880 mm, and a swing range of 180 degrees, the JANSEN® BHSM-175 offers a wide working range. The excavator arm’s lateral offset is particularly advantageous when digging along house walls or excavating strip foundations.
The rear excavator comes standard with a 300 mm wide excavator bucket. The bucket force is 1,100 kg. A tractor with an engine power of at least 25–30 PS is recommended for operation.
The key advantages of the JANSEN® BHSM-175 at a glance
- Over 1,750 mm digging depth: For a variety of excavation and digging tasks.
- 880 mm hydraulic side shift: Enables off-center work, such as along house walls.
- 180-degree swing range: Wide lateral working range of the excavator arm.
- 300 mm bucket included: The rear excavator comes standard with a matching excavator bucket.
- 1,100 kg bucket force: Robust design for demanding excavation work.
- Separate hydraulic system: Power is supplied via the tractor’s PTO.
- Three-point hitch, Categories I and II: For tractors with a compatible hitch.
- Hydraulic stabilizers: Extendable stabilizers increase stability during operation.
- Cross-control: Operation of the rear excavator via a cross-control lever.
- Optional accessories: Additional bucket widths and an excavator thumb are available.
Rear excavator with its own hydraulic system and PTO drive
The JANSEN® BHSM-175 is mounted via the tractor’s three-point hitch. The hitch is designed for Category I and Category II.
A major advantage of the rear loader is its independent hydraulic system. It is driven by the tractor’s PTO, so no additional power from the tractor’s hydraulic system is required.
The required PTO shaft is already included in the scope of delivery. The specified PTO speed is 540 rpm.
For operation, the tractor should have a power output of at least 25–30 PS.
880 mm side shift – Flexible operation along house walls
The key difference between the JANSEN® rear excavators of the BHM and BHSM series is the additional side shift of the excavator arm.
On the JANSEN® BHSM-175, the excavator arm can be shifted laterally by 880 mm. This expands the working range compared to the standard BHM versions.
This feature is particularly helpful when excavation work is not to be performed directly behind the tractor.
Excavating strip foundations
Thanks to the lateral movement of the excavator arm, for example, strip foundations can be excavated directly along house walls.
The tractor does not need to be positioned directly over the area to be excavated. Instead, the excavator arm can be used at an angle.
In combination with the 180-degree swivel range, the rear loader offers a versatile operating radius.
Over 175 cm digging depth and 1,100 kg bucket force
With a digging depth of over 1,750 mm, the JANSEN® BHSM-175 is suitable for a variety of earthmoving and excavation tasks.
The standard 300 mm excavator bucket enables precise digging. The specified bucket force of 1,100 kg underscores the robust design of the skid-steer loader.
The excavator arm has a swing range of 180 degrees. The bucket’s opening angle is 203 degrees.
The maximum dump height is 1,800 mm.
Hydraulic stabilizers for greater stability
During operation, the hydraulic stabilizers can be extended to increase the stability of the backhoe.
The stabilizer width is 1,380 mm.
Stable support is particularly important during excavation work, where greater forces act on the excavator arm.
The JANSEN® BHSM-175 is operated via a cross-control.
Versatile applications of the JANSEN® BHSM-175
The rear loader is suitable for various excavation tasks and expands a tractor’s capabilities to include a loader function.
Excavation and digging
With a digging depth of over 1,750 mm and the standard 300 mm bucket, a variety of excavation tasks can be performed.
Strip foundations along house walls
The 880 mm side shift enables offset work and is particularly helpful when excavating strip foundations directly against house walls.
Working with Different Bucket Widths
Additional buckets are available as options to meet various requirements. This allows the backhoe to be adapted to various excavation tasks.
Optional accessories for the JANSEN® BHSM-175
Various accessories are available for the JANSEN® BHSM-175, which expand the backhoe’s range of applications.
- 260 mm bucket: Optionally available narrow excavator bucket.
- 500 mm bucket: Optionally available excavator bucket with a larger working width.
- 900 mm trench clearing bucket without teeth: For corresponding clearing work.
- Excavator thumb: A practical accessory for lifting tree trunks, rocks, slabs, and similar objects.
Note: These accessories are available as options and are not included in the standard scope of delivery.
Technical Specifications of the JANSEN® BHSM-175
- Model: JANSEN® BHSM-175
- Part Number: 1325114
- Mounting: Category I and Category II
- Overall length: 2600 mm
- Digging depth: > 1750 mm
- Support width: 1380 mm
- Height: Max. 3120 mm
- Dump height: Max. 1800 mm
- Swing radius: 180 degrees
- Side shift: 880 mm
- Bucket opening angle: 203 degrees
- Bucket force: 1,100 kg
- PTO speed: 540 rpm
- PTO: Included
- Hydraulic pressure: 160 bar
- Flow rate: 25 L/min
- Weight: Approx. 570 kg
- Weight with packaging: Approx. 609 kg
- Packaging dimensions (L × W × H): Approx. 140 × 120 × 170 cm
Scope of delivery
The JANSEN® BHSM-175 comes standard with the following components:
- JANSEN® BHSM-175 Rear Loader
- 300 mm Loader Bucket
- PTO Shaft
Additional bucket widths and the loader thumb are available as options.
Delivery & Commissioning
The JANSEN® BHSM-175 is delivered well-packaged in a sturdy steel frame.
Final Assembly
You should plan on approximately 1.5 hours for final assembly.
Assembly is generally straightforward. However, we recommend that the assembly be performed by two people.
Required Operating Fluids
The following operating fluids are required before commissioning:
- Grease: For lubricating the rear excavator.
- Hydraulic oil: Approx. 20–30 liters.
- Recommended hydraulic oil grade: HLP46.
Please take these specifications into account when preparing for initial startup.
If you have any questions or issues, the JANSEN® team will be happy to assist you by phone.
JANSEN® – In-house Development, Master Workshop, and Spare Parts Supply
We developed the JANSEN® rear excavators ourselves. In addition to sales, we offer expert service through our in-house master workshop as well as a comprehensive supply of replacement parts.
We typically have every replacement part in stock and are also available to assist you personally with technical questions or issues.
With us, you speak directly with knowledgeable representatives—not an anonymous call center.
You’re welcome to get a firsthand look at our machines before making a purchase. We recommend an on-site visit or a consultation over the phone.
Frequently Asked Questions (FAQ) about the JANSEN® BHSM-175
1. What tractor power is required for the JANSEN® BHSM-175?
To operate the JANSEN® BHSM-175, your tractor should have an engine power of at least 25–30 PS. The rear loader is attached via a Category I or II three-point hitch and driven by the PTO.
2. Does the rear loader require a hydraulic connection on the tractor?
No. The JANSEN® BHSM-175 has its own hydraulic system, which is driven by the tractor’s PTO. Therefore, the tractor simply needs to be equipped with the appropriate PTO drive. The required PTO shaft is included in the scope of delivery.
3. How deep can the JANSEN® BHSM-175 dig?
The maximum digging depth is over 1750 mm (175 cm). The rear excavator also has a swivel range of 180 degrees and a side shift of 880 mm.
4. Which bucket is included, and are there any other accessories?
The rear loader comes standard with a 300 mm wide excavator bucket. Optional buckets with 260 mm and 500 mm widths as well as a 900 mm trench-clearing bucket without teeth are available. In addition, a grapple is available, which can be used to lift tree trunks, stones, or slabs, for example.
5. How is the rear loader shipped, and what type of hydraulic oil is required?
The JANSEN® BHSM-175 is shipped in a sturdy steel frame. Allow approximately 1.5 hours for final assembly. We recommend that two people perform the assembly. For commissioning, you will need grease and approximately 20–30 liters of hydraulic oil. We recommend HLP46 hydraulic oil.
Internal item#: 1021030649
Rundum zufrieden.
Robustes Gerät, bei guter mitgelieferter Anleitung schnell endmontiert und geschmiert. 2 Schläuche waren vertauscht, dies ist schnell korrigiert. Leichte und mittlere Grabungsarbeiten sind kein Problem. Man braucht mehr Zeit, da die Bewegungen nicht synchron ausgeführt werden können.
Exzellenter Service der Fa. Jansen. Frage per Mail sonntags schnell beantwortet, Montag Rückruf durch kompetenten Mitarbeiter, Dienstag kamen per Post Ersatz- und zusätzliche Teile auf Kulanz.
Werde Geräte zukünftig möglichst bei Jansen bestellen.
Top Gerät
Der BHSM 175 ist ein sehr schöner und leistungsstarker Heckbagger.
Beim aufbau gab es keinerlei Probleme.
Ich nutze in mit meinem MF 25 (27 PS) und kann den Bagger und die Firma Jansen nur weiter empfehlen.
....tolles Gerät
....auf der Suche nach einem Bagger als Anbaugerät für meinen kleinen Unimog U411 mit 32 PS hab ich diesen Händler und diese Maschine gefunden. Eurosteuerung und eigene Hydraulik über Zapfwelle so wie ein sehr offenes Gespräch mit dem Team der Fa. Jansen haben mich überzeugt das Gerät zu bestellen. Super Kaufabwicklung und Lieferung. Ich bin sehr überrascht wie leistungsfähig dieser Bagger tatsächlich ist. Er wird derzeit zum Bau eines Forstweges verwendet. Einziger Minuspunkt: die Bedienungsanleitung, wenn jemand tatsächlich auf sie angewiesen ist und keinen Bezug zu solchen Maschinen hat. Das ist außer der Tatsache, dass die Ansteuerung des Baggerarmes (rauf / runter war verwechselt) umgeschraubt werden mußte alles was es zu bemängeln gibt. Super Gerät, Super Beratung. Preis Leistung Top. Grüße an das JansenTeam. Wenn Ihr wollt ich hab auch Fotos und ein Video von dem Bagger im Einsatz.
Every consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed.
Rundum zufrieden.
Robustes Gerät, bei guter mitgelieferter Anleitung schnell endmontiert und geschmiert. 2 Schläuche waren vertauscht, dies ist schnell korrigiert. Leichte und mittlere Grabungsarbeiten sind kein Problem. Man braucht... continue reading