Tolle Maschine/Super vielseitig!
Die Saugleistung ist der Hammer! Ich kann den Laubsauger vielseitig einsetzen. Perfekt um meinen Hof im Herbst von Laub zu befreien. Einfach, wie im Video den Schlauch in den Auswurf schieben, Laubsauger an, Mähwerk...
JANSEN® LS-700 – Leaf Vacuum with a 13 PS Briggs & Stratton Engine, 700-Liter Collection Bag, and Towing Bar
The JANSEN® LS-700 is a powerful leaf vacuum with a 13 PS gasoline engine, a 700-liter collection bag, and a suction capacity of approx. 3,800 m³/h. It is suitable for collecting large quantities of leaves and cleaning yards, courtyards, and other outdoor areas.
Thanks to its towing bar, the leaf vacuum can be moved by hand or attached to a suitable towing vehicle such as a lawn tractor or ATV. The pneumatic tires, sturdy chassis, and low center of gravity make it easy to handle.
The package includes a suction hose approximately 3 meters long with a diameter of 200 mm as well as a collection bag with a capacity of approximately 700 liters. The suction hose also allows you to clean hard-to-reach areas, such as under hedges, bushes, or in corners.
The key advantages of the JANSEN® LS-700 at a glance
- 13 PS gasoline engine: Powerful 4-stroke engine from Briggs & Stratton with a 420 cm³ displacement.
- Approx. 3,800 m³/h suction capacity: For collecting large amounts of leaves.
- 700-liter collection bag: Large capacity for longer work sessions.
- 3-meter suction hose included: With a 200-mm diameter for versatile cleaning tasks.
- 400-mm turbine impeller: With four powerful blades for shredding and compacting the suctioned material.
- Hand-operated or trailer-mounted: The drawbar can be converted for use with a towing vehicle.
- For lawn tractors or ATVs: Can be attached to suitable towing vehicles.
- Tiltable collection bag: Makes it easier to empty the collected leaves.
- Suction hose with handle and casters: For effortless handling.
- Hose bracket on the frame: Helps guide the suction hose while working.
- Optional extension hose: Additional 3-meter suction hose available.
13 PS Briggs & Stratton gasoline engine for large amounts of leaves
The JANSEN® LS-700 is powered by a 4-stroke gasoline engine from Briggs & Stratton with a 420 cm³ displacement. The engine power is 13 PS.
The engine drives a powerful turbine wheel housed in a sturdy casing. This enables the leaf vacuum to achieve a rated suction capacity of approx. 3,800 m³/h.
It runs on regular gasoline. The fuel tank has a capacity of 6.5 liters. The specified fuel consumption is approximately 1.2 liters per hour.
The engine is started using a recoil starter.
3,800 m³/h suction capacity and 400 mm turbine wheel
With a suction capacity of approx. 3,800 m³/h, the JANSEN® LS-700 is designed to handle large volumes of leaves.
The turbine wheel with a diameter of 400 mm features four powerful blades. These shred and compress the collected material.
Shredding allows the collected leaves to be stored in the collection bag in a space-saving manner.
Important Note Regarding Acorns, Chestnuts, and Nuts
Like other leaf vacuums, the JANSEN® LS-700 reaches its limits when dealing with acorns, chestnuts, nuts, and similar objects.
Depending on the surface, individual acorns may be picked up. However, due to their smooth surface and weight, such objects are generally difficult to vacuum up. Reliable collection of these materials cannot therefore be guaranteed.
700-liter collection bag with practical tilt function
The JANSEN® LS-700 comes standard with a collection bag with a volume of approximately 700 liters.
This provides ample space for collecting larger quantities of leaves and light debris.
The collection bag can be conveniently emptied using a tilting function.
In combination with the powerful turbine impeller, larger quantities of leaves can be picked up, shredded, and collected in the collection bag.
3-meter suction hose with a 200-mm diameter
The package includes a suction hose approximately 3 meters long with a diameter of 200 mm.
Thanks to its length, the hose also allows you to work in hard-to-reach areas.
Cleaning under hedges, bushes, and in corners
The suction hose allows you to reach areas that are difficult to access with other cleaning devices. These include, for example, areas under hedges and bushes as well as tight corners.
Handle, casters, and hose bracket
The suction hose set is equipped with a handle that includes casters.
In addition, the hose is held in place by a hose bracket attached to the frame.
These features make it easier to handle the suction hose while working.
Leaf vacuum with tow bar for lawn tractors, ATVs, and manual operation
The JANSEN® LS-700 features a sturdy chassis, a low center of gravity, and pneumatic tires.
With a net weight of approx. 110 kg, the unit can also be moved by hand thanks to the drawbar.
Conversion for trailer operation
The drawbar can be converted in just a few simple steps so that the leaf vacuum can be attached to a suitable towing vehicle.
JANSEN® lists, for example, a lawn tractor or an ATV as possible towing vehicles.
This allows the leaf vacuum to be used on larger properties and moved by a towing vehicle while in operation.
Convey grass clippings directly from the lawn tractor into the collection bag
When used with a lawn tractor, the JANSEN® LS-700 offers another application option.
The suction inlet of the leaf vacuum can be connected directly to the corresponding discharge port on the lawn tractor.
This allows grass clippings to be transported directly into the 700-liter collection bag of the JANSEN® LS-700.
This application expands the leaf vacuum’s capabilities beyond simply collecting leaves.
Optional extension hose for greater reach
An additional approx. 3-meter-long suction hose with a 200-mm diameter is available as an option for the JANSEN® LS-700.
The extension is offered including a matching clamp.
This allows you to extend the reach of the standard suction hose.
Note: The additional extension hose is not included in the standard package.
Versatile Applications of the JANSEN® LS-700
The leaf vacuum can be used for various cleaning tasks on properties and outdoor areas.
Collects Large Quantities of Leaves
With approx. 3,800 m³/h suction capacity and the 700-liter collection bag, the LS-700 is suitable for collecting large quantities of leaves.
Cleaning hard-to-reach areas
The 3-meter-long suction hose allows for cleaning under hedges, bushes, and in hard-to-reach places.
Collecting grass clippings with a lawn tractor
When properly connected to the discharge chute of a lawn tractor, grass clippings can be transported directly into the LS-700’s collection bag.
Technical Specifications of the JANSEN® LS-700
- Model: JANSEN® LS-700
- Part Number: 1415509
- Engine: Briggs & Stratton 4-stroke gasoline engine
- Engine power: 13 PS
- Displacement: 420 cm³
- Fuel: Regular gasoline
- Fuel tank capacity: 6.5 liters
- Fuel consumption: Approx. 1.2 liters per hour
- Starter: Recoil starter
- Noise level: Approx. 97.5 dB at 3,600 rpm
- Turbine wheel: Ø 400 mm
- Turbine blades: 4
- Suction capacity: Approx. 3,800 m³/h
- Suction hose: Ø 200 mm, approx. 3 m long
- Collection bag capacity: Approx. 700 liters
- Manual operation: Pull rod included
- Trailer operation: Drawbar for towing vehicles
- Dimensions when assembled (L × W × H): Approx. 240 × 97 × 127 cm
- Weight: Approx. 110 kg
- Packaging dimensions (L × W × H): 114 × 104 × 103 cm
- Weight with packaging: Approx. 192 kg
Scope of delivery
The JANSEN® LS-700 is delivered as a complete set with the following components:
- JANSEN® LS-700 leaf blower with Briggs & Stratton gasoline engine
- Collection bag with a capacity of approx. 700 liters
- Suction hose, approx. 3 meters long and 200 mm in diameter
- Pull bar for manual operation
- Drawbar for use with a towing vehicle
- German operating instructions
An additional extension hose is available as an option.
Delivery & Setup
The JANSEN® LS-700 is delivered well-packaged in a sturdy cardboard box.
Final Assembly
You should plan on approximately 3 hours for final assembly.
JANSEN® recommends that assembly be performed, ideally, with a second person.
A German operating manual is included in the scope of delivery.
Engine Oil and Fuel
Before starting the engine for the first time, you will need approximately 1 liter of engine oil.
JANSEN® recommends a multi-grade oil with a classification of 10W40 or 15W40.
The fuel used is regular gasoline.
The fuel tank holds 6.5 liters.
JANSEN® – In-house Development, Master Workshop, and Spare Parts Supply
The JANSEN® LS-700 was developed in-house by JANSEN®.
In addition to the equipment itself, JANSEN® offers expert service through its in-house master workshop as well as a comprehensive supply of replacement parts.
According to JANSEN®, the required replacement parts are generally available from stock.
If you have technical questions or issues, knowledgeable representatives are available to assist you personally by phone.
Many JANSEN® machines can also be viewed and tested in the showroom.
Frequently Asked Questions (FAQ) about the JANSEN® LS-700
1. What are the engine power and suction capacity of the JANSEN® LS-700?
The leaf vacuum is equipped with a 13 PS Briggs & Stratton 4-stroke gasoline engine with a displacement of 420 cm³. The specified suction capacity is approx. 3,800 m³/h.
2. How large is the collection bag, and what suction hose is included?
The JANSEN® LS-700 comes with a collection bag with a capacity of approximately 700 liters and an suction hose approximately 3-meter-long suction hose with a 200 mm diameter. The collection bag can be emptied using a tilt function.
3. Can the JANSEN® LS-700 be attached to a lawn tractor or a ATV?
Yes. The drawbar can be converted for trailer use in just a few simple steps. This allows the LS-700 to be attached to a suitable towing vehicle, such as a lawn tractor or an ATV. Alternatively, it can be moved by hand using the tow bar.
4. Can the LS-700 also collect grass clippings from a lawn tractor?
Yes. The suction nozzle of the JANSEN® LS-700 can be connected directly to the discharge chute of a compatible lawn tractor. This allows the grass clippings to be transported directly into the 700-liter collection bag.
5. How is the JANSEN® LS-700 shipped, and what is needed for setup?
The leaf blower is delivered well-packaged in a sturdy cardboard box. Allow about 3 hours for final assembly, ideally with a second person. Before starting it up, you’ll need about 1 liter of motor oil. We recommend a multigrade oil with a classification of 10W40 or 15W40.
Internal item#: 1036931527
klare Empfehlung
Hab mir vor kurzem den LS-700 geholt und bin echt positiv überrascht! Das Ding hat richtig Power und zieht selbst dicke Laubhaufen ohne zu meckern weg. Die Turbine ist komplett aus massivem Metall gebaut und die Messer machen das Laub schön klein. Der Motor springt jedes Mal zuverlässig an – keine Zickereien.
Klare Kaufempfehlung
Tolle Maschine/Super vielseitig!
Die Saugleistung ist der Hammer! Ich kann den Laubsauger vielseitig einsetzen. Perfekt um meinen Hof im Herbst von Laub zu befreien. Einfach, wie im Video den Schlauch in den Auswurf schieben, Laubsauger an, Mähwerk an, und los geht´s.
Every consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed.
klare Empfehlung
Hab mir vor kurzem den LS-700 geholt und bin echt positiv überrascht! Das Ding hat richtig Power und zieht selbst dicke Laubhaufen ohne zu meckern weg. Die Turbine ist komplett aus massivem Metall gebaut und die... continue reading