sehr laufruhig, gutes Mulchergebnis auch bei etwas höherem Gras/Kraut, schnelle Lieferung, aber
Gehäuse sauber verarbeitet, Schweißnähte sind gut. kleinere Lackfehler, aber für eine Landmaschine ausreichend. Keilriemen, Keilriemenscheiben, Getriebe sauber und gerade montiert, Keilriemenspannung genau wie in... continue reading
Top Machine
nach Schwierigkeiten mit spedion alles gut Machine macht sehr guten Eindruck Zusammenbau kein Problem allerdings das ding aus der Kiste kriegen dauert genausolang wie der Zusammenbau ha dann gleich mahl 2 ha gemulcht... continue reading
Super
Super Mähergebnis. Läuft absolut ruhig. Passt optimal zu meinem MF245 auch mit Unterlenkerfanghaken.
Spitze!!!
Ich habe mir einen EFGC 175 gekauft und bin mit dem Gerät super zufrieden. Die Beratung am Telefon und vor Ort war wirklich sehr gut. Das Mulchergebnis ist wunderbar und auch die Verarbeitung ist total in Ordnung.... continue reading
Soweit gut.
Pro: Gerät kam gut verpackt an. Haben jetzt schon 1ha geschlegelt und er läuft noch gut. PREIS-LEISTUNG top Gelieferte Zapfwelle ist schön lang. Con: Der Versand war furchtbar, es ging über 2 Subunternehmer,... continue reading
Nach sehr kurzer Lieferzeit kam der Mulcher wohlbehalten an. Ein großes Lob für die akurate und stabile Verpackung in der Holzkiste. Allerdings bringt es wenig, wenn sich die Anleitung zum ordnungsgemäßen Öffnen der Kiste am Mulcher und damit in der Kiste
Alles top ! Gerne wieder !
Der Mäher ist gut bei mir angekommen. Sehr zu loben ist die akurate und stabile Verpackung in der Holzkiste. Kleiner Tip : Es bringt wenig, wenn die Anleitung zum richtigen Öffnen der Kiste am Mäher in der Kiste liegt. Vorschlag : Legt doch einfach eine K
Nichts zu bemängeln
Habe mir im Frühsommer den Mulcher direkt bei Janssen abgeholt. Personal und Beratung Top! Auch die Ausstellung sehenswert. Der Mulcher tut was er soll, und das sehr gut! Das Schnittbild ist einwandfrei und auch... continue reading
Preis Leistung Top
Habe das erste mal gemulcht läuft Tip Top würde ihn wieder kaufen ,von der Bestellung bis zur Lieferung 2.5 Tage besser geht nicht.
Mulcher EFGC-175
Bin mit dem Mulcher sehr Zufrieden. Sehr gutes Mulchbild. Auch die Abwicklung war sehr nett und freundlich.
preiswert und gut
der schlegelmulcher hat nun sein 4. mähen hinter sich und ich bin sehr zufrieden. das preis-leistungs-verhältnis stimmt hier allemal.
nach 6 Monaten Einsatz alles gut
haben das mähwerk im juni bekommen und haben es nun fast ein halbes jahr im einsatz. bislang keine probleme. das ergebnis ist auch gut.
JANSEN® EFGC-175 – Heavy-duty flail mower with a 172 cm working width and 28 flail hammers for tractors with 30 PS or more
The JANSEN® EFGC-175 is a robust flail mower designed for maintaining meadows, pastures, fallow land, orchards, and larger green spaces. With a working width of 172 cm, 28 specially hardened hammer blades, and a reinforced angle gearbox, this mower is suitable for demanding mulching tasks.
The flail mower is designed for tractors with 30 PS or more and is driven by the tractor PTO at 540 U/min. The appropriate drive shaft is included in the scope of delivery. It is attached via a three-point hitch, Category I or higher.
Its robust construction, the double-spiral rotor, the heavy-duty trailing roller, and the standard freewheel transmission make the JANSEN® EFGC-175 a versatile mower for regular lawn care. Even tall grass, bushy vegetation, straw, and light brush can be shredded with the heavy hammer blades.
The key advantages of the JANSEN® EFGC-175 at a glance
- 172 cm working width: For the efficient maintenance of meadows, pastures, fallow land, and orchards.
- 28 hardened hammer blades: Each weighing approx. 0.8 kg for high rotational mass.
- For tractors 30 PS and up: Suitable for appropriately equipped tractors.
- Three-point hitch, Cat. I and up: For attachment to suitable tractors.
- PTO shaft included: The required PTO shaft is included in the scope of delivery.
- 540 rpm PTO speed: Driven by the tractor’s PTO.
- Reinforced bevel gearbox: Particularly robust design for power transmission.
- Double spiral rotor: For even rotor loading and smooth operation.
- Heavy-duty trailing roller: Standard with a 95 mm diameter.
- Freewheel transmission: Part of the standard equipment.
- Adjustable cutting height: Via the top link and the side skids.
- Large maintenance hatch: Facilitates access to the flail shaft and replacement of the hammer flails.
- Galvanized protective vanes: Pendulum-suspended vanes at the front.
Robust flail mower for tractors with 30 PS or more
The JANSEN® EFGC-175 was designed for use on tractors with an engine power of at least 30 PS.
The Category I three-point hitch allows for attachment to appropriately equipped tractors.
Power is supplied via the tractor PTO shaft at 540 rpm. The required drive shaft is included in the scope of delivery.
A key feature of the EFGC-175 is the specially reinforced bevel gearbox. According to JANSEN®, this model uses the heaviest gearbox in its class.
In combination with the solid flail shaft and the heavy hammer flails, this creates a high flywheel mass that aids in shredding challenging crop material.

172 cm working width for meadows, pastures, and fallow land
With a working width of 1720 mm, the JANSEN® EFGC-175 is suitable for maintaining larger green spaces.
The flail mower is designed for a variety of mowing and mulching tasks. Typical applications include:
- Meadows: Mulching grass and taller vegetation.
- Pastures: Regular maintenance of green spaces.
- Fallow land: Processing of dense and bushy vegetation.
- Orchards: Mulching operations on appropriately accessible areas.
- Green spaces: Maintenance of larger areas using a tractor.
The robust construction and heavy hammer blades also allow for the processing of very tall grass, straw, and light brush.
28 heavy hammer blades for reliable mulching results
The JANSEN® EFGC-175 is equipped with 28 specially hardened hammer blades.
Each hammer blade weighs approx. 0.8 kg. This creates a high flywheel mass, which aids in the shredding of dense and challenging vegetation.
For grass, straw, and light woody material
The hammer blades are suitable for processing grass, bushy vegetation, straw, and light woody material.
Even very tall grass and challenging material can be processed and shredded with the EFGC-175.
Thanks to its robust construction, the mower is designed for regular mulching work on various types of green spaces.
Double-spiral rotor for smooth operation and even load distribution
The JANSEN® EFGC-175 features a double-spiral rotor.
The spiral arrangement of the hammer blades distributes the load on the rotor more evenly during mulching.
This promotes smooth operation and reduces vibrations during operation.
The more even rotor load helps protect the drive components and contributes to consistent mulching results.
Reinforced bevel gearbox and solid drive
The JANSEN® EFGC-175 is characterized by its particularly robust construction.
The specially reinforced bevel gearbox is designed to meet the demands of regular mulching operations.
The solid flail shaft has a diameter of 100 mm.
Power is transmitted via three timing belts.
In combination with the heavy hammer flails, this creates a high flywheel mass that facilitates the mulching of challenging plant material.
Heavy-duty rear roller and adjustable cutting height
Standard equipment on the JANSEN® EFGC-175 includes a heavy-duty rear roller with a 95 mm diameter.
The rear roller helps guide the mower during operation.
Adjust cutting height via top link and skids
The cutting height can be adjusted via the tractor’s top link as well as the side-mounted skids.
This allows the mower’s working height to be adjusted to different terrain and vegetation conditions.
Freewheel transmission as standard
The JANSEN® EFGC-175 also features a freewheel transmission, which is included as standard equipment.
Galvanized protective slats on the front
On the front of the flail mulcher are swinging, galvanized protective slats.
These serve to limit the ejection of stones and other clippings during mulching.
The protective slats are part of the mower’s standard safety equipment.
Important: Even with protective slats, the ejection of foreign objects cannot be completely ruled out. Therefore, the safety distances and instructions in the operator’s manual must be observed.
Large maintenance hatch for easy access to the flail shaft
The JANSEN® EFGC-175 features a generously sized maintenance hatch.
This provides good access to the flail shaft, thereby facilitating maintenance work and the replacement of individual flails.
The maintenance-friendly design facilitates regular inspection and care of the mower.
Important safety note: In accordance with German accident prevention regulations, the maintenance hatch must remain closed throughout the entire mowing operation. This is to prevent stones or other foreign objects from being ejected from the mower.
Versatile Applications of the JANSEN® EFGC-175
Mulching meadows and pastures
With its 172 cm working width and 28 heavy hammer flails, the EFGC-175 is ideal for the regular maintenance of meadows and pastures.
Tackling tall grass and fallow land
The hardened flails enable the shredding of tall grass and denser vegetation on fallow land.
Maintaining orchards and green spaces
The flail mower can also be used for maintenance on appropriately accessible areas in orchards and green spaces.
Shredding straw and light woody vegetation
The JANSEN® EFGC-175 is also designed for processing straw, bushy vegetation, and light woody vegetation.
Technical Specifications of the JANSEN® EFGC-175
- Model: JANSEN® EFGC-175
- Part Number: 1775013
- Equipment Type: Flail Mower / Flail Mower for Tractors
- Working Width: 1720 mm
- Length: 1840 mm
- Width: 700 mm
- Required tractor power: At least 30 PS
- Mounting: Three-point hitch, Category I or higher
- PTO shaft: Included
- PTO speed: 540 rpm
- Number of hammer flails: 28
- Weight per hammer flail: Approx. 0.8 kg
- Rotor: Double-spiral rotor
- Flail shaft diameter: 100 mm
- Trailing roller diameter: 95 mm
- Drive: 3 timing belts
- Cutting height adjustment: Via top link and side skids
- Freewheel transmission: Standard
- Protective vanes: Pendulum-mounted, galvanized
- Maintenance hatch: Included
- Weight: Approx. 375 kg
- Weight with packaging: Approx. 405 kg
- Packaging: Wooden crate
- Packaging dimensions (L × W × H): 1900 × 870 × 800 mm
Scope of delivery
The JANSEN® EFGC-175 comes with the following items:
- JANSEN® EFGC-175 flail mower with a 172 cm working width
- 28 heavy hammer flails
- PTO shaft / drive shaft
- Heavy-duty trailing roller
- Freewheel gearbox
- German Operating Instructions
- Exploded View
Note: The top link pin is not included in the scope of delivery.
Delivery & Commissioning
The JANSEN® EFGC-175 is securely packed in a sturdy wooden crate and delivered.
Final Assembly
You should plan on approximately 2 hours for final assembly.
According to JANSEN®, assembly is straightforward. However, assistance from a second person is recommended for assembly.
A German operating manual and an exploded view diagram are included in the scope of delivery.
Fill with gear oil before first use
Important: The gearbox of the JANSEN® EFGC-175 is delivered dry and must be filled with gear oil before first use.
- Gear oil quantity: Approx. 1.3 liters
- Gear oil: Classification 80W90
Filling must be performed before first use in accordance with the operating instructions.
Note the upper link pin
The upper link pin is not included in the scope of delivery and must be procured separately if needed.
JANSEN® – In-house Development, Master Workshop, and Spare Parts Supply
JANSEN® develops its own machines and, in addition to the equipment itself, offers a reliable supply of replacement parts as well as personalized consultation.
The company operates its own master workshop, where expert staff provide support for technical questions or problems.
According to JANSEN®, nearly all replacement parts are permanently available from stock.
Many machines can also be viewed in the showroom by prior appointment.
Frequently Asked Questions (FAQ) about the JANSEN® EFGC-175
1. For which tractors is the JANSEN® EFGC-175 suitable?
The flail mower is designed for tractors with at least 30 PS. It features a Category I three-point hitch and is driven by the tractor’s PTO at 540 rpm.
2. What is the working width of the EFGC-175, and how many hammer flails does it have?
The JANSEN® EFGC-175 has a working width of 172 cm. The mower is equipped with 28 specially hardened hammer blades, each weighing approximately 0.8 kg.
3. Is the PTO shaft included with the JANSEN® EFGC-175?
Yes. The PTO shaft (or drive shaft) is included in the scope of delivery. The top link pin, however, is not included and must be provided separately if needed.
4. Can the flail mower handle tall grass and bushy vegetation?
Yes. The 28 heavy hammer flails are suitable for processing tall grass, straw, bushy vegetation, and light brush. The double-spiral rotor ensures smooth operation and even load distribution across the mower.
5. How is the EFGC-175 shipped, and what gear oil is required?
The flail mower is delivered in a sturdy wooden crate. Allow approximately 2 hours for final assembly. Before initial startup, the gearbox—which is delivered dry—must be filled with approximately 1.3 liters of 80W90 gear oil.
Internal item#: 1011395213
Gutes Gerät! Preis-Leistung unschlagbar!
Ich habe den Mulcher bei einem Händler (Dambach Landtechnik in 74722 Buchen gekauft). Dort konnte ich das Gerät anschauen und sogar an meinem Traktor testen. Es gab von Herrn Dambach noch gute Tipps zur richtigen Einstellung des Oberlenkers. Auch wurde der Mulcher ohne Aufpreis montiert- ich habe natürlich geholfen. Das Gerät selbst wirkt wertig. Gute verarbeitet und stabil.
Nachträglich habe ich dann noch die manuelles Seitenverschiebung dazu gekauft. Gute Ergänzung. Einzig die Montagelöcher die man dann nicht mehr braucht muss ich noch verschließen. Da kommt ab und an mal was raus. Durch die Klappe ist die Reinigung im hinteren Bereich einfach. Etwas schwieriger ist es an der vorderen Seite.
Ich bin alles in allem sehr zufrieden und habe nun schon einige male gemulcht. Würde den Mulcher sofort wieder kaufen und ärgere mich sogar, dass ich nicht schon früher zugeschlagen habe.
Die oben genannte Firma ist Vertriebspartner von Jansen und bietet neben Service viel Know-how. Nicht umsonst kommen da Leute von überall her.
sehr laufruhig, gutes Mulchergebnis auch bei etwas höherem Gras/Kraut, schnelle Lieferung, aber
Gehäuse sauber verarbeitet, Schweißnähte sind gut. kleinere Lackfehler, aber für eine Landmaschine ausreichend.
Keilriemen, Keilriemenscheiben, Getriebe sauber und gerade montiert, Keilriemenspannung genau wie in der Betriebsanleitung eingestellt.
Soweit alles sehrgut, aber dann:
Kuppeldreieck krumm, Schweißfehler ( Poren und Bindungsfehler, trotz Beschichtung deutlich sichtbar), das hat wohl der Azubi am ersten Tag gemacht. Abwarten ob das hält, könnte gut gehen, weil die Maschine sehr wenig schwingt und deswegen geringe Belastung zu erwarten ist.
Fast alle Schrauben mussten nachgezogen werden, lustigerweise waren ausgerechnet die Schrauben an der Nachlaufwalze fest, dem Bauteil mit der geringsten Belastung. Alle anderen mussten nachgezogen werden. Steht ja auch im Handbuch.
Trotz allem glaube ich einen guten Mulcher bekommen zu haben. Das Mulchergebnis überzeugt und die Laufruhe macht Hoffnung, das alles lange halten wird.
Also gebt dem "kleinen Chinesen", der die Mulcher zusammenschraubt mal Kraftfutter, dann werden auch die Schrauben fest!
Und bildet den "Azubi" richtig aus, dann werden auch die Schweißnähte am Kuppeldreieck richtig gut.
Am Ende kommt dann ein perfekter Mulcher heraus! Mich würde es freuen.
So ist er leider nur fast gut!
Top Machine
nach Schwierigkeiten mit spedion alles gut Machine macht sehr guten Eindruck Zusammenbau kein Problem allerdings das ding aus der Kiste kriegen dauert genausolang wie der Zusammenbau ha dann gleich mahl 2 ha gemulcht mit meien 60Ps MF wobei ich ca einen halben morgen mit Brennesel 1,50 ,m Hoch nieder gemulcht das klappte ohne Probleme
hat also meine Erwartung voll erfühlt! mfg Ralf
Super
Super Mähergebnis. Läuft absolut ruhig.
Passt optimal zu meinem MF245 auch mit Unterlenkerfanghaken.
Spitze!!!
Ich habe mir einen EFGC 175 gekauft und bin mit dem Gerät super zufrieden.
Die Beratung am Telefon und vor Ort war wirklich sehr gut. Das Mulchergebnis ist wunderbar und auch die Verarbeitung ist total in Ordnung. Die Montageanleitung ist sehr übersichtlich gestalltet und auch für eine Person ist das kein Problem.
Alles in allem ein super Produkt.
Die Ausstellung in Emlichheim ist auf jeden Fall ein besuch wert!!!
Soweit gut.
Pro:
Gerät kam gut verpackt an.
Haben jetzt schon 1ha geschlegelt und er läuft noch gut.
PREIS-LEISTUNG top
Gelieferte Zapfwelle ist schön lang.
Con:
Der Versand war furchtbar, es ging über 2 Subunternehmer, kurzzeitig war der Schlegler für 3 Tage für die Spediteure "nicht zu finden im Lager" und konnte dann wege "kein Platz im Auto" nicht geliefert werden.
Beim Spediteur ging niemand ans Telefon.
Nach 2 1/2 Wochen kam er dann an.
Blindstopfen fliegen beim schlegeln aus den Löchern, da Mulchgut von innen gegen sie schlägt.
1 Unterlegscheibe fehlte.
Alles in allem ein gutes Gerät, Preis-Leistung eigentlich unschlagbar
Nach sehr kurzer Lieferzeit kam der Mulcher wohlbehalten an. Ein großes Lob für die akurate und stabile Verpackung in der Holzkiste. Allerdings bringt es wenig, wenn sich die Anleitung zum ordnungsgemäßen Öffnen der Kiste am Mulcher und damit in der Kiste
Alles top ! Gerne wieder !
Der Mäher ist gut bei mir angekommen. Sehr zu loben ist die akurate und stabile Verpackung in der Holzkiste. Kleiner Tip : Es bringt wenig, wenn die Anleitung zum richtigen Öffnen der Kiste am Mäher in der Kiste liegt. Vorschlag : Legt doch einfach eine K
Nichts zu bemängeln
Habe mir im Frühsommer den Mulcher direkt bei Janssen abgeholt.
Personal und Beratung Top! Auch die Ausstellung sehenswert.
Der Mulcher tut was er soll, und das sehr gut!
Das Schnittbild ist einwandfrei und auch hohes Gras wird sauber verarbeitet.
Auch kleinere Hecken und Sträucher (bis etwa Daumendick) sind absolut kein Problem.
Das wichtigste ist nicht zu schnell zu fahren, gerade bei hohem Aufwuchs.
Habe ihn jetzt insgesamt etwa 12h im Einsatz gehabt - ohne Mängel.
Der Zusammenbau war auch Problemlos machbar.
Die Lackierung am Getriebe ist nicht sehr gut. Am Gehäuse an sich ist der Lack ok, aber an den 4 Stellen mit dem Geweinde hält der Lack nicht. Ist aber wirklich nur ein Schönheitsfehler. Der Rest ist sauber verarbeitet und gut lackiert.
Die blauen Stopfen für die Löcher, in der die Verschiebbare Aufhängung montiert wird, könnt ihr Euch sparen - die fliegen beim ersten Einsatz weg.
Zusammengefasst: Jederzeit wieder!
Preis Leistung Top
Habe das erste mal gemulcht läuft Tip Top würde ihn wieder kaufen ,von der Bestellung bis zur Lieferung 2.5 Tage besser geht nicht.
Mulcher EFGC-175
Bin mit dem Mulcher sehr Zufrieden. Sehr gutes Mulchbild. Auch die Abwicklung war sehr nett und freundlich.
preiswert und gut
der schlegelmulcher hat nun sein 4. mähen hinter sich und ich bin sehr zufrieden. das preis-leistungs-verhältnis stimmt hier allemal.
nach 6 Monaten Einsatz alles gut
haben das mähwerk im juni bekommen und haben es nun fast ein halbes jahr im einsatz. bislang keine probleme. das ergebnis ist auch gut.
Every consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed.
Gutes Gerät! Preis-Leistung unschlagbar!
Ich habe den Mulcher bei einem Händler (Dambach Landtechnik in 74722 Buchen gekauft). Dort konnte ich das Gerät anschauen und sogar an meinem Traktor testen. Es gab von Herrn Dambach noch gute Tipps zur richtigen... continue reading