JANSEN® BSF-60T – Hydraulic stump grinder for tractors with 30–60 PS, PTO drive, and 20 cutting blades

The JANSEN® BSF-60T is a powerful stump grinder, tree stump grinder, and root grinder for tractors. With its robust PTO drive, 20 cutting blades made of hardened tool steel, and a hydraulic control system, it is suitable for the reliable removal of tree stumps and root stocks of various sizes and wood types.

The stump grinder was developed for attachment to tractors with a recommended engine power of 30 to 60 PS. It is driven by the tractor PTO at 540 rpm. The required PTO shaft is included in the scope of delivery.

A special feature of the JANSEN® BSF-60T is the hydraulic control of the milling head. Two hydraulic cylinders allow the milling head to be moved both horizontally and vertically. Operation is conveniently carried out from the tractor cab.

With a milling wheel 60 cm in diameter, a swivel angle of 40°, and a possible milling depth of approx. 30 cm below ground level, the BSF-60T is designed for demanding tasks in gardening and landscaping, forestry, and property maintenance.

The key advantages of the JANSEN® BSF-60T at a glance

• For tractors with 30–60 PS: Powerful tree stump grinder for appropriately equipped tractors.
• PTO drive at 540 rpm: Power transmission via the tractor’s PTO.
• PTO shaft included: The required PTO shaft is already included in the scope of delivery.
• 20 hardened milling blades: Robust milling tools made of hardened tool steel.
• 60 cm diameter milling wheel: Large-diameter milling wheel for demanding applications.
• Individually replaceable milling blades: Maintenance-friendly design with bolted milling tools.
• Hydraulic control: Vertical and horizontal movement via two hydraulic cylinders.
• Operation from the tractor cab: Convenient control during milling operations.
• 40° swivel arc: For lateral movement of the milling head.
• Approx. 60 cm milling swivel range: For processing tree stumps and areas with roots.
• Up to 30 cm milling depth: Milling below ground level.
• Up to 40 cm milling height: Milling above ground level.
• 950 rpm milling wheel speed: For powerful wood milling.
• Cat. I and II three-point hitch: For attachment to compatible tractors.
• Sturdy support legs: Part of the robust base frame construction.
• Solid construction: With a net weight of approx. 365 kg.

Stump grinder for tractors with 30 to 60 PS

The JANSEN® BSF-60T was developed specifically for mounting on tractors.

The recommended tractor power range is 30 to 60 PS. This makes the machine suitable for tractors with the appropriate power output, a compatible three-point hitch, and hydraulic equipment.

The base frame consists of a sturdy construction with a three-point hitch and robust support legs.

Category I and II three-point hitches

The stump grinder is designed for attachment to tractors with a Category I or II three-point hitch.

This allows it to be combined with a variety of suitable tractors.

Before purchasing, check the tractor’s existing three-point hitch, lifting capacity, and required hydraulic connections.

PTO drive at 540 rpm

The JANSEN® BSF-60T is driven by the tractor PTO at 540 rpm.

The required PTO shaft is included in the scope of delivery.

A separate gasoline engine is therefore not required. The drive power is provided by the tractor.

60 cm milling wheel with 20 hardened milling blades

The heart of the JANSEN® BSF-60T is the 60 cm milling wheel.

A total of 20 milling blades made of hardened tool steel are bolted to the milling wheel.

The robust design enables the gradual grinding of tree stumps and root stocks.

20 milling blades made of hardened tool steel

The milling blades are made of hardened tool steel and are designed to withstand the high stresses involved in tree stump processing.

With a total of 20 milling blades, the BSF-60T features a powerful milling tool for processing various types of wood.

Milling blades can be replaced individually

The milling blades are individually bolted to the milling wheel.

This allows individual worn or damaged blades to be replaced as needed.

This maintenance-friendly design simplifies upkeep and supports cost-effective operation.

Milling wheel speed of 950 rpm

The milling wheel reaches a speed of 950 rpm.

In combination with the 20 hardened milling blades, this enables powerful wood shredding.

Hydraulic control of the milling head

A key advantage of the JANSEN® BSF-60T is the hydraulic movement of the milling head.

The machine is equipped with two hydraulic cylinders that allow the milling head to be swiveled both vertically and horizontally.

This allows the milling wheel to be guided precisely over the tree stump.

Horizontal swivel movement

The horizontal hydraulic movement allows the milling head to swivel sideways.

The swivel angle is 40°. The specified milling swivel range is approximately 60 cm.

The lateral movement makes it possible to remove the tree stump step by step over a larger area.

Vertical movement of the milling head

The second hydraulic cylinder enables vertical movement of the milling head.

This allows the working height to be adjusted during the milling process.

The hydraulic height adjustment facilitates work above and below ground level.

Convenient operation from the tractor cab

The JANSEN® BSF-60T can be operated directly from the tractor cab.

The horizontal and vertical movement of the milling head is controlled via the tractor’s hydraulic system.

This eliminates the need for the operator to manually swivel the milling head during normal operation.

This design offers a high level of operating comfort and facilitates the controlled processing of larger tree stumps.

Two double-acting hydraulic connections required

To operate the hydraulic milling head control, two double-acting hydraulic connections are required on the tractor.

Before purchasing, check whether the existing tractor has the appropriate connections.

The hydraulic control system is a central component of the machine’s operation.

Up to 30 cm milling depth below ground level

With the JANSEN® BSF-60T, tree stumps can be processed not only above ground but also below ground level.

The maximum specified milling depth is approximately 30 cm below ground level.

This allows even deeper sections of the rootstock to be milled.

Up to 40 cm milling height above ground level

The maximum specified milling height is approximately 40 cm above ground level.

This means that even tree stumps located higher above ground can be processed.

Wide working range for various tree stumps

Thanks to the combination of a 40 cm milling height, a 30 cm milling depth, and hydraulic swivel movement, the BSF-60T offers a versatile working range.

The actual working positions that can be achieved depend on the tractor’s setup and local conditions.

40° swivel arc and approx. 60 cm milling swivel range

The milling head of the JANSEN® BSF-60T has a swivel arc of 40°.

The milling swing range specified by the manufacturer is approximately 60 cm.

This lateral mobility allows the milling head to be guided over the tree stump without having to reposition the tractor for each individual milling movement.

This supports an efficient and controlled working method.

For larger tree stumps, the machine can be repositioned as work progresses.

Robust construction with three-point hitch and support legs

The JANSEN® BSF-60T was designed for demanding stump grinding tasks.

The base frame consists of the three-point hitch and sturdy support legs.

Weighing approximately 365 kg, the machine features a solid construction.

The design is engineered to withstand the stresses encountered when milling tree stumps and root stocks.

To ensure safe operation, the tractor requirements and the instructions in the operator’s manual must be followed.

For tree stumps of various sizes and wood types

The JANSEN® BSF-60T is designed for the removal of tree stumps and root stocks of various sizes and wood types.

Especially for larger-scale projects, the tractor-powered stump grinder offers advantages over small, hand-held stump grinders.

The combination of PTO drive, a large cutting wheel, and hydraulic control enables the processing of challenging tree stumps.

Removing Tree Stumps After Felling

After a tree is felled, a stump often remains in the ground.

With the JANSEN® BSF-60T, this stump can be gradually ground away.

Processing rootstocks below ground level

The maximum milling depth of approx. 30 cm allows for the processing of rootstock areas below ground level.

This enables areas to be prepared for future use.

Also suitable for larger tree stumps

The BSF-60T was developed specifically for tasks where smaller hand-held grinders reach their limits.

Actual performance depends, among other factors, on the type of wood, the diameter, and the condition of the tree stump.

Versatile Applications of the JANSEN® BSF-60T

Gardening and Landscaping

The JANSEN® BSF-60T is suitable for removing tree stumps during gardening and landscaping work.

The hydraulic control system allows for convenient operation from the tractor.

Forestry and Land Maintenance

The stump grinder can also be used to remove unwanted tree stumps during the maintenance of forest land and other areas.

Working on Agricultural Land

Remaining rootstocks and tree stumps can be removed on agricultural land.

Professional Tree Stump Removal

The combination of 20 hardened cutting blades, a 60 cm cutting wheel, and hydraulic control makes the BSF-60T a powerful solution for demanding stump removal tasks.

Technical Specifications of the JANSEN® BSF-60T

• Model: JANSEN® BSF-60T
• Part Number: 1055003
• Equipment Type: Stump Grinder / Tree Stump Grinder / Root Grinder for Tractors
• Recommended tractor power: 30–60 PS
• Mounting: Category I and II three-point hitch
• Drive: Tractor PTO
• PTO: Included in delivery
• PTO speed: 540 rpm
• Required hydraulic connections: 2 × double-acting
• Hydraulic control: Horizontal and vertical
• Hydraulic cylinders: 2
• Number of milling blades: 20
• Milling blade material: Hardened tool steel
• Milling blades individually replaceable: Yes
• Milling wheel diameter: Approx. 600 mm
• Milling wheel speed: 950 rpm
• Milling swivel range: Approx. 600 mm
• Swivel angle: 40°
• Milling height: Approx. 400 mm above ground level
• Milling depth: Approx. 300 mm below ground level
• Base frame: Three-point hitch with sturdy support legs
• Weight: Approx. 365 kg
• Packaging dimensions (L × W × H): 165 × 72 × 107 cm
• Gearbox oil: 80W90
• Required gearbox oil quantity: Approx. 1 liter

Scope of delivery

The JANSEN® BSF-60T comes with the following items:

• JANSEN® BSF-60T stump grinder for tractor attachment
• Grinding wheel with 20 hardened grinding blades
• PTO shaft / drive shaft
• Hydraulic stump grinder head control with two hydraulic cylinders
• Three-point hitch for Categories I and II
• Sturdy support legs

Important: The tractor required for operation is not included in the scope of delivery.

The gear oil must be filled before initial startup. Approximately 1 liter of 80W90 gear oil is required.

Delivery & Commissioning

The JANSEN® BSF-60T is delivered well-packaged.

Final Assembly

You should allow approximately 2 hours for the initial assembly.

Before first use, check the assembly, the attachment to the tractor, and the hydraulic connections in accordance with the manufacturer’s instructions.

Fill with transmission oil before initial startup

Important: The transmission of the JANSEN® BSF-60T is delivered dry.

Before initial operation, the transmission must be filled with suitable oil.

• Required transmission oil quantity: Approx. 1 liter
• Transmission oil: Classification 80W90

Filling must be performed before initial operation in accordance with the manufacturer’s instructions.

Check the tractor and hydraulic system

To operate the JANSEN® BSF-60T, the tractor must meet the appropriate technical requirements.

• Recommended tractor power: 30–60 PS
• Three-point hitch: Category I or II
• PTO speed: 540 rpm
• Hydraulic connections: 2 × double-acting

Before first use, all connections, fasteners, and safety-related components should be inspected.

Safety Notice: During tilling, pieces of wood, stones, and other foreign objects may be ejected. The prescribed safety distances and all instructions in the operator’s manual must be observed.

JANSEN® – In-House Development, Master Workshop, and Spare Parts Supply

JANSEN® develops its own machines and, in addition to the equipment technology, offers its own master workshop as well as a reliable spare parts supply.

According to the manufacturer, required spare parts are generally available directly from stock.

For technical questions, problems, or questions regarding commissioning, expert representatives are available by phone.

Many JANSEN® machines can be viewed in the showroom by prior appointment.

This way, customers benefit not only from a robust machine but also from expert advice and long-term service.

Frequently Asked Questions (FAQ) about the JANSEN® BSF-60T

1. For which tractors is the JANSEN® BSF-60T suitable?

The JANSEN® BSF-60T is designed for tractors with a recommended engine power of 30 to 60 PS. It features a Category I and II three-point hitch and is driven by the tractor’s PTO at 540 rpm.

2. What hydraulic connections are required for the BSF-60T?

For the hydraulic control of the milling head, two double-acting hydraulic connections are required on the tractor. The milling head can be moved horizontally and vertically via two hydraulic cylinders. It is operated from the tractor cab.

3. How deep can the JANSEN® BSF-60T mill tree stumps?

The maximum specified milling depth is approximately 30 cm below ground level. Above ground level, the machine can process tree stumps up to a milling height of approximately 40 cm. The milling swivel range is approximately 60 cm with a swivel arc of 40°.

4. How many milling blades does the JANSEN® BSF-60T have?

The stump grinder has 20 milling blades made of hardened tool steel. These are bolted to a 60 cm milling wheel and can be replaced individually. The milling wheel speed is 950 rpm.

5. Is the PTO shaft included in the scope of delivery, and what gear oil is required?

Yes. The PTO shaft is included with the JANSEN® BSF-60T. However, the transmission is shipped dry and must be filled with approximately 1 liter of 80W90 transmission oil before initial operation. Allow approximately 2 hours for the initial installation.