JANSEN® AGF-125 Light Slope Mulcher – Lightweight Model for Tractors 24 PS and Up

The JANSEN® AGF-125 Light is a lightweight, side-shifting, and angle-adjustable slope mulcher for tractors 24 PS and up. It is ideal for users who need a compact and maneuverable mulcher for smaller tractors.

Thanks to its lightweight design, the AGF-125 Light is easy to handle and versatile—for example, for maintaining meadows, ditches, slopes, field edges, and hard-to-reach areas.

Quick Overview – Key Benefits

• Lightweight design for smaller tractors
• Suitable for tractors with 24 PS or more
• Can be shifted sideways to the right in the direction of travel
• Angle-adjustable from approx. +90° to -55°
• Floating position thanks to a shut-off valve
• 20 hammer blades, each weighing approx. 0.4 kg
• Trailing roller for even ground contact
• Slats / protective screens against stone ejection
• PTO shaft included

Flexible in use – can be shifted laterally and angled

Thanks to the lateral offset and angle adjustment, you can reach areas that are difficult to work with a conventional rear mulcher. The AGF-125 Light is therefore particularly suitable for ditches, riverbanks, field edges, earthen embankments, and slopes.

The mulcher can be shifted to the right in the direction of travel and angled up and down. The adjustment range is approximately +90° to -55°.

Drive and Adjustment

The drive is provided by the PTO shaft included in the scope of delivery, operating at 540 rpm. For hydraulic adjustment of offset and tilt, 2 double-acting hydraulic connections are required on the tractor.

When using the optionally available add-on kit, only 1 double-acting connection and a 12-volt electrical connection are required. The connector is not included in the scope of delivery.

Clean mulching results with low power requirements

The cutting height can be adjusted using the side-mounted skids and the sturdy trailing roller. The 20 hammer flails, each weighing approx. 0.4 kg, reliably shred grass, weeds, and light brush.

Thanks to its comparatively low power requirements, the AGF-125 Light is well-suited for smaller tractors.

Safety and Features

The rear roller supports smooth ground tracking and ensures a clean cut. Front vanes reduce the escape of clippings and stones during operation.

• Trailing roller for clean ground tracking
• Front vanes to prevent material ejection
• Shut-off valve for float position
• Side skids for adjusting cutting height

Technical Specifications

• Mowing width: 1250 mm
• Weight: 357 kg
• Tilt angle: approx. +90° to -55°
• Blade type: approx. 0.4 kg hammer blades
• PTO: included
• RPM: 540
• Drive: 3 V-belts
• Hitch: Three-point, Cat. I or higher
• Tractor power: min. 24 PS
• Dimensions when assembled: approx. 1350 x 735 x 1500 mm
• Dimensions including packaging: approx. 800 x 1450 x 820 mm
• Weight with packaging: approx. 405 kg

Delivery & Assembly

The mower is delivered in a sturdy wooden crate and is disassembled for transport. Assembly is easily manageable with a little manual dexterity, ideally with two people.

An overhead crane or a vehicle with a front loader is helpful for lifting the mower out of the transport crate. Allow approximately 1 to 2 hours for final assembly.

The package includes a German operating manual and an exploded view diagram. If you need assistance, we’re happy to help by phone.

Important Note: The transmission is shipped dry and must be filled with approximately 1.2 liters of 80W90 transmission oil before use.

FAQ

For which tractors is the AGF-125 Light suitable?

The embankment mulcher is suitable for tractors with 24 PS or more.

What tasks can be performed with the mulcher?

The AGF-125 Light is suitable for mowing and mulching embankments, ditches, riverbanks, field edges, meadows, and hard-to-reach areas.

What hydraulic connections are required?

Two double-acting hydraulic connections are required for offset and angle adjustment. With the optional add-on kit, one double-acting connection plus a 12-volt electrical connection is sufficient.

Is there a float position?

Yes, the float position is possible thanks to a shut-off valve.

Is the PTO shaft included in the scope of delivery?

Yes, the PTO shaft is included in the scope of delivery.

Service & Spare Parts Supply

We offer a reliable supply of replacement parts as well as expert advice from our master workshop. Many replacement parts are always in stock.

If you have any questions or issues, speak directly with our knowledgeable staff—no call centers involved.

Conclusion

The JANSEN® AGF-125 Light is a compact and lightweight slope mulcher for tractors with 24 PS or more. With lateral shift, angle adjustment, float position, and 20 hammer flails, it is ideal for maintaining slopes, ditches, field edges, and smaller green spaces.