The Jansen MKB-500 sweeper has a powerful petrol engine from Briggs&Stratton (750EX Series), is self-propelling, and comes with a recoil starter that can be used very easily to start the engine.
Here we are offering sweepers that come in a set with a sweeper container and a snow blade. With the container the dirt can be collected immediately and conveniently disposed of.
Light snowfalls can be easily swept away with the sweeper alone. If the snow is higher than 3-5 cm, you simply have to use the snow blade included in the set. This can be mounted very easily and without using any tools.
The sweeper has 3 forward gears and 1 reverse gear - that way you can always find the right speed, and using the accelerator adjust it even further.
The height and pressure of the brush on the ground can be regulated via a centrally mounted handle. The brush can also be adjusted at 5 different sideways levels.
Plus there are 6 gears to adjust the rotational speed of the brushes.
Compare our machines with competing products! You won’t find anything comparable. We didn’t only develop these devices ourselves, but also offer excellent service (master technicians workshop) and spare parts. We have almost every part in stock. In the event of questions or problems we are only a phone call away. With us you speak with knowledgeable staff and not with “call-centre agents”!
We have all of our products assembled and ready for operation in our exhibition halls. We would love for you to come by to test them!
- Briggs&Stratton engine, 750EX Series
- Fuel type: Normal Petrol
- Starter: Recoil starter
- Weight: 100 kg without fluids
- Weight including packing: 140 kg
- Working width: 100 cm
- Bristle diameter: 350 mm
- Bristle dimensions: 1.0 x 130 mm
- Speed, forwards: 2.5 / 3.6 / 4.5 km/h
- Speed, reverse: 2.5 km/h
- Forward gears: 3
- Reverse gears: 1
- Tank capacity: 1.4 L
- Performance: approx. 4400 m²/h
- Fuel consumption: approx. 0.5 L/h
- Tyres: 13 - 5.00 - 6
- Tyre pressure: 1.4 bar
- Dimensions of packaging: 115x85x127 cm (LxWxH)
- Dimensions: 160x103x113 cm (LxWxH)
- Amount of engine oil: approx. 1L (10W40 or 15W40)
The machine is delivered well packed in an iron crate. You should allow approx. ½ hour for final assembly. Assembly is very easy; you only need to screw on the brushes, the plastic mudguards and the rods. Everything else is pre-assembled. You will also need approx. 0.6 litres of engine oil for the engine. For this purpose we recommend multi-grade oil of classification 10W40 or 15W40. An assembly guide and an instruction manual are included.
Internal item#: 1029589414