Aufkleber-
Moin wir haben diesen Mulcher aus der ersten Generation TOP Gerät. Diesen Sommer haben wir ihn neu in Farbe gebracht. wäre es möglich, das man den kompletten Aufkleber Satz nachbekommt? LG und macht weiter so
Montageanleitung könnte besser sein
Wir haben den Mulcher jetzt ca. 3 Monate und haben noch nicht viel damit gemacht. Wir haben ein paar Gräben und ein paar Wegränder gemulcht. Mit derArbeit des Gerätes sind wir sehr zufrieden. Das... continue reading
Fundamental improvements compared to the previous model:
- wider mulch housing
- massively reinforced and improved three-point hanger
- reinforced trailing roller
- reinforced flail shaft
- stable transport rollers
- improved collision protection
This model has a mowing width of 178 cm and is driven using a P.T.O, included as part of the delivery. It can be moved to the left and right and you can set it at an angle (90° upward and 55° downward). For this function you need 2 hydraulic control circuits on your tractor, as the mower unit has 2 double-action hydraulic cylinders for this purpose.
The 16 specially hardened, 1.2 kg hammer blades, which are arranged on a double spiral drive shaft, shred clippings to a minimum size. Even very high grass, bushy or straw-like clippings are no problem for this mower because 2 counter blades are installed.
With maximum lateral alignment the dimension from the middle of the tractor to the outer edge of the mowing unit is approx. 273cm. Please find more dimensions in the following drawings:
Furthermore, the Jansen AGF-180 comes with collision protection. This is triggered in the event of contact with hindrances, for example fencepost etc., and allows the verge mulching mower unit to swing upward in order to minimise the risk of greater damage.
The AGF-180 mulching mower additionally has a trailing roller and a freewheel gearbox. The suspended, galvanised slats at the front of the mower unit prevent stones escaping. The transport wheels make it easier for you to manoeuvre on level ground without attaching the mower to your tractor. The cutting height can be set with the top controller and the runners mounted on the side.
The mower unit is hung using the three point linkage of your tractor (from Cat. II). Your tractor should have at least 60 HP.
Compare our machines with competing products! You won’t find anything comparable. We didn’t only develop these devices ourselves, but also offer excellent service (master technicians workshop) and spare parts. We have almost every part in stock. In the event of questions or problems we are only a phone call away. With us you speak with knowledgeable staff and not with “call-centre agents”!
In the event of questions or problems we are also only a phone call away do help you personally. With us you speak with knowledgeable staff and not with “call-centre agents”!
We have all of our products assembled and ready for operation in our exhibition halls. We would love for you to come by to test them!
Technical specifications:
- Mowing width: approx. 1800 mm
- Weight: 790 kg
- Tilt movement range: +90° to -55°
- Cutting blade type: 1.2 kg hammer blades
- P.T.O: included in delivery
- Rpm: 540
- drive shaft Ø: 170 mm
- trailing roller Ø: 170 mm
- Wall thickness: 5 - 14 mm (depending on location on the mower)
- Drive: 4 Piece drive belt
- Mounting: Three point hitch from Cat. II
- Tractor: min. 60 HP
- Dimensions built: approx 2250x2150x1120 mm (LxWxH)
- Packaging measurements: 2390x1120x1010 mm (LxWxH)
- Weight including packing: 870 kg
Note:
The device is delivered well packed and disassembled in a wooden crate. For the final assembly you should plan about 4-5 hours. Included in the delivery is an instruction manual, as well as an exploded view. The assembly is usually no problem, however, it is recommended to perform the assembly with another person. If assistance is needed, we are available by telephone. The gearbox is dry and must be filled with oil (80W90, approx. 1,2 liter) before first use.
Internal item#: 1011395280
Die Maschine überzeugt...
Seit 2015 arbeiten wir mit einem AGF 180 bis heute ohne Probleme. Die Maschine wurde von Anfang an nicht geschont, denn nur so kann man Fazit ziehen. Ob Bracheflächen ,Hecken oder Feldränder, der Jansen frisst das sauber weg. 5-6cm dicke Heckengewächse , Steine in der Strohstoppel,.. wir bewerten diesen Mulcher inklusive Preis-Leistungsverhältnis so, dass wir uns wieder für einen Jansen entscheiden würden
Aufkleber-
Moin wir haben diesen Mulcher aus der ersten Generation TOP Gerät. Diesen Sommer haben wir ihn neu in Farbe gebracht. wäre es möglich, das man den kompletten Aufkleber Satz nachbekommt? LG und macht weiter so
Montageanleitung könnte besser sein
Wir haben den Mulcher jetzt ca. 3 Monate und haben noch nicht viel damit gemacht. Wir haben ein paar Gräben und ein paar Wegränder gemulcht. Mit derArbeit des Gerätes sind wir sehr zufrieden. Das Preisleistungsverhältnis Stimmt unserer Ansicht nach.
Aber man sollte die Montageanleitung des Gerätes etwas anpassen. Der Zusammenbau war komplizierter als es die Anleitung beschrieb. So mussten viele Arbeiten durchgeführt werden, welche nicht in der Anleitung beschrieben waren.
Wir würden die Maschine nach dem jetzigen Stand, aber auf jeden Fall wieder kaufen.
Every consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed.
Die Maschine überzeugt...
Seit 2015 arbeiten wir mit einem AGF 180 bis heute ohne Probleme. Die Maschine wurde von Anfang an nicht geschont, denn nur so kann man Fazit ziehen. Ob Bracheflächen ,Hecken oder Feldränder, der Jansen frisst das... continue reading