Prices incl. VAT, plus shipping costs
Item in stock1
Fundamental improvements compared to the previous model:
- wider mulch housing
- massively reinforced and improved three-point hanger
- reinforced trailing roller
- reinforced flail shaft
- stable transport rollers
- improved collision protection
This model has a mowing width of 155 cm and is driven using a P.T.O, included as part of the delivery. It can be moved to the left and right and you can set it at an angle (90° upward and 55° downward). For this function you need 2 hydraulic control circuits on your tractor, as the mower unit has 2 double-action hydraulic cylinders for this purpose.
The 14 specially hardened, 1.2 kg hammer blades, which are arranged on a double spiral drive shaft, shred clippings to a minimum size. Even very high grass, bushy or straw-like clippings are no problem for this mower because 2 counter blades are installed.
With maximum lateral alignment the dimension from the middle of the tractor to the outer edge of the mowing unit is approx. 254 cm. Please find all dimensions in the following drawings:
Furthermore, the Jansen AGF-160 comes with collision protection. This is triggered in the event of contact with hindrances, for example fencepost etc., and allows the verge mulching mower unit to swing upward, site and backward in order to minimise the risk of greater damage.
The AGF-160 mulching mower additionally has a trailing roller and a freewheel gearbox. The suspended, galvanised slats at the front of the mower unit prevent stones escaping. The transport wheels make it easier for you to manoeuvre on level ground without attaching the mower to your tractor. The cutting height can be set with the top controller and the runners mounted on the side.
The mower unit is hung using the three point linkage of your tractor (from Cat. II). Your tractor should have at least 50 HP.
Compare our machines with competing products! You won’t find anything comparable. We didn’t only develop these devices ourselves, but also offer excellent service (master technicians workshop) and spare parts. We have almost every part in stock. In the event of questions or problems we are only a phone call away. With us you speak with knowledgeable staff and not with “call-centre agents”!
We have all of our products assembled and ready for operation in our exhibition halls. We would love for you to come by to test them!
- Mowing width: 1550 mm
- Weight: 765 kg
- Tilt movement range: +90° to -55°
- Cutting blade type: 1.2 kg hammer blades (14 pc.)
- P.T.O: Included in delivery
- Rpm: 540
- drive shaft Ø: 170 mm
- trailing roller Ø: 170 mm
- Wall thickness: 4 - 15 mm (depending on location on the item)
- Drive: 4 Piece drive belt
- Mounting: Three point hitch from Cat. II
- Tractor: min. 50 HP
- Packaging measurements: 2070x1050x870 mm (LxWxH)
- Weight including packing: 795 kg
The device is delivered well packed and disassembled in a wooden crate. For the final assembly you should plan about 4-5 hours. Included in the delivery is an instruction manual, as well as an exploded view. The assembly is usually no problem, however, it is recommended to perform the assembly with another person. If assistance is needed, we are available by telephone. A top link pin is also included in the delivery! The gearbox is dry and must be filled with oil (80W90, approx. 1 liter) before first use.
Internal item#: 1030973916
Every consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed.