JANSEN® AGF-180 Slope Mower – Heavy-duty model for demanding mowing tasks

The JANSEN® AGF-180 is a particularly robust slope mower designed for professional use in agriculture, municipal services, and landscape maintenance. With a working width of approx. 180 cm, hydraulic side adjustment, and a wide swivel range, this slope mower is ideal for ditches, slopes, riverbanks, field edges, and hard-to-reach areas.

Unlike the lighter models in the AGL series, the AGF-180 is the heaviest version in this mower class. Reinforced components, a solid bevel gear, and heavy hammer flails ensure maximum stability and a long service life even under the toughest operating conditions.

Quick Overview – Key Benefits

• Heavy-duty and robust construction for intensive use
• Working width of approx. 180 cm
• Hydraulic side adjustment and tilt adjustment
• Working angle from +90° to -55°
• 16 hardened hammer flails, approx. 1.2 kg each
• Double spiral rotor for smooth operation and reduced power requirements
• 2 counter blades for particularly fine chopping
• Reinforced flail shaft and trailing roller
• Heavily reinforced three-point hitch
• Collision protection against obstacles
• Heavy-duty trailing roller and free-wheel gearbox
• PTO shaft included as standard

Perfect for slopes, ditches, and edge areas

The hydraulic side shift allows for convenient processing of slopes, roadside ditches, riverbanks, earthen embankments, and edge strips. The mulcher can be both shifted laterally and hydraulically angled.

The working range extends from +90° upward to -55° downward. Two double-acting hydraulic control valves on the tractor are required for these functions.

At maximum extension, the distance between the center of the tractor and the outer edge of the mulcher is approx. 273 cm. This allows even hard-to-reach areas to be accessed without difficulty.

Robust construction for continuous use

The AGF-180 has been reinforced in many areas compared to the previous model:

• Wider mulching housing
• Heavily reinforced three-point hitch
• Reinforced flail shaft
• Reinforced trailing roller
• Sturdy transport rollers
• Improved impact protection

With a net weight of approx. 790 kg, the AGF-180 is one of the heaviest machines in its class and impresses with its enormous stability and outstanding smoothness of operation.

16 heavy hammer flails for maximum shredding

The total of 16 specially hardened hammer flails with an individual weight of approx. 1.2 kg generate a high flywheel mass and reliably shred even dense clippings.

In combination with the built-in 2 counter blades, grass, brush, fallow land, and straw-like material are processed particularly finely.

Even very tall grass or bushy vegetation is no problem for the AGF-180.

Double spiral rotor for smooth operation

The double spiral rotor distributes the load evenly across the entire flail shaft. This reduces vibrations and significantly improves smoothness of operation.

In addition, the tractor’s power requirement decreases, while wear and stress on the drive components are reduced.

Well-designed features for greater safety

The integrated collision protection safeguards the machine against major damage. If the mower encounters obstacles such as fence posts or large stones, the mower deck can swivel upward and backward to the side.

The heavy trailing roller ensures even ground contact and a clean cut. Pendulum-suspended, galvanized protective slats further reduce the ejection of stones and clippings.

The standard transport rollers facilitate maneuvering on paved surfaces without being attached to the tractor.

Technical Specifications

• Cutting width: approx. 1800 mm
• Weight: approx. 790 kg
• Weight with packaging: approx. 890 kg
• Tilt angle: +90° to -55°
• Blade type: 16 flails, approx. 1.2 kg each
• PTO: included
• PTO speed: 540 rpm
• Flail shaft Ø: 170 mm
• Trailing roller Ø: 170 mm
• Wall thickness: 5–14 mm (depending on position on the machine)
• Drive: 4 timing belts
• Mounting: Three-point hitch, Cat. II or higher
• Tractor power: min. 60 hp
• Dimensions when assembled: approx. 225 x 215 x 112 cm (LxWxH)
• Packaging dimensions: approx. 239 x 112 x 101 cm (LxWxH)

Delivery & Assembly

The AGF-180 is delivered securely packed and disassembled in a sturdy wooden crate. Allow approx. 4–5 hours for final assembly.

The scope of delivery includes a German operating manual and an exploded view diagram. Assembly is generally straightforward but is ideally performed by two people.

Before initial use, the transmission must be filled with approx. 1.3 liters of 80W90 transmission oil.

FAQ – Frequently Asked Questions about the JANSEN® AGF-180

For which tractors is the AGF-180 suitable?

The slope mower is designed for tractors with 60 hp or more and is mounted via a Cat. II three-point hitch.

Which hydraulic connections are required?

Two double-acting hydraulic control units are required for side shift and tilt adjustment.

For which applications is the AGF-180 suitable?

Ideal for slopes, ditches, riverbanks, field edges, roadside greenery, fallow land, and general green space maintenance.

What is the swivel range?

The working range extends from +90° upward to -55° downward.

What flails are installed?

The mulcher is equipped with 16 specially hardened hammer flails. Each flail weighs approx. 1.2 kg.

Is the PTO shaft included in the scope of delivery?

Yes, the appropriate PTO shaft is included as standard.

Does the mulcher have collision protection?

Yes. The integrated collision protection minimizes the risk of major damage upon contact with obstacles.

Conclusion – Robust slope mulcher for professional users

The JANSEN® AGF-180 combines high mulching performance, enormous stability, and maximum flexibility for demanding mowing work on slopes and edge areas.

With hydraulic side adjustment, a large swivel range, a double-spiral rotor, and heavy hammer flails, this slope mower is the ideal solution for professional users in agriculture, municipal services, and landscape maintenance.

Important delivery note

Note:
Since the shipping company is unable to unload the item due to its size, the customer must provide a forklift or suitable unloading equipment on-site.