Prices incl. VAT, plus shipping costs
Jansen's flail mower HMM-170 is designed with a hydraulic drive in the front attachment and typically used for agricultural use, on private properties, or by municipalities and communities.
With its Euro-style mounting bracket, the Jansen HMM-170 mulching mower is not only suited for tractors. Thanks to the hydraulic drive, the mower can be used universally and therefore also be attached to farm loaders, mini excavators, municipal vehicles, and much more.
Weighing 350 g, the 28 specially hampered blades crush the cutting material to minimum size. Even very high grass and bushy or straw-like materials are no problem for this mower! The spiral arrangement of the mallets also provides an ideal suction effect for an improved distribution of force and quiet operation.
Thanks to its even drive shaft load, the double spiral shaft drive provides particularly quiet operation and lasting durability with significantly reduced effort. Even very high grass, and bushy or straw-like materials are no problem for this mower!
In addition, the mulching mower is also equipped with a heavy trailing roller. The cutting height can be adjusted via the skids attached to the side. Oscillating, suspended, galvanized slats on the front of the mower prevent the ejection of stones, etc. The 3 covered belts secure additional overloads.
The connected vehicle should have a minimum output of 20 HP and must be equipped with a hydraulic circuit.
Compare our products with competing products! You're not likely to find something that compares. We have not only developed these machines, but we also provide all services (professional workshop) and supply spare parts. We usually have all parts stocked. We are also happy to help you over the phone if you if you have questions or problems. You will speak with specialized staff, not call center agents!
Almost all of our products are displayed ready-to-use in an exhibition hall. You are welcome to take a look at any time! Please schedule an appointment in advance.
- Drive: Hydraulic tractor system (3 belts powered by a hydraulic ssytem)
- Working width: 1,700 mm
- Total width: 1,800 mm
- Exterior height: 400 mm
- Power requirements: min. 55 l/min, 180 bar
- Required oil pressure: 180 - 200 bar
- Required oil amount: 55 - 65 l/min.
- Hammer blades: 350 g, 28 pieces
- Euro-style front-end loader mounting bracket
- 2 impellers on the front exterior
- Double spiral drive shaft (dia. 110 mm)
- height-adjustable trailing roller (dia. 100 mm)
- Front guard: cantilever galvanized slats
- Packaging: Wooden box
- Package Dimensions: 192x84x81 cm (LxWxH)
- Weight: approx. 355 kg
- Weight including packaging: approx. 390 kg
The device is delivered well packed and part-assembled in a wooden crate. You should allow approx. 1-2 hours for final assembly. A step by step assembly guide as well as several detailed diagrams are part of the manual that comes with your mower.
Internal item#: 1032408478