JANSEN® AGF-200 Slope Mower – Maximum Reach for Professional Mowing

The JANSEN® AGF-200 is an exceptionally robust and powerful slope mower designed for professional use in agriculture, municipal services, landscape maintenance, and road maintenance. With a generous working width of approx. 198 cm, hydraulic side adjustment, and a wide swivel range, this slope mower is ideal for ditches, slopes, riverbanks, field edges, and hard-to-reach areas.

Unlike lighter models in this equipment class, the AGF-200 is a particularly heavy-duty version featuring a reinforced angular gearbox, solid construction, and heavy hammer blades. This makes the machine optimally designed for continuous and demanding use.

Quick Overview – Key Benefits

• Heavy-duty and robust construction for intensive use
• Cutting width of approx. 198 cm
• Hydraulic side adjustment and tilt adjustment
• Working angle from +90° to -55°
• 20 hardened hammer blades, each weighing approx. 1.2 kg
• Double-spiral rotor for smooth operation and reduced power requirements
• 2 counter blades for particularly fine shredding
• Reinforced bevel gearbox
• Heavily reinforced three-point hitch
• Heavy-duty trailing roller with scraper
• Collision protection against damage
• Freewheel transmission as standard
• Transport rollers for easy maneuvering
• Includes ball valve for float position on the hydraulic cylinder
• PTO shaft included
• Suitable for tractors with 60 PS or more

Ideal for embankments, ditches, and field edges

Thanks to the hydraulic side adjustment and hydraulic tilt adjustment, even hard-to-reach areas can be worked efficiently. Whether roadside ditches, slopes, field edges, riverbanks, or earthen embankments—the AGF-200 offers maximum flexibility in daily use.

The mulcher can be swiveled up to 90° upward and up to 55° downward. This requires two double-acting hydraulic control units on the tractor.

At maximum extension, the distance between the center of the tractor and the outer edge of the mulcher is approximately 290 cm. This makes it easy to reach even distant work areas.

Heavy-duty construction for the toughest conditions

The JANSEN® AGF-200 was developed specifically for intensive, continuous use. Compared to earlier models, the design has been significantly reinforced in many areas.

• Widened mulching housing
• Heavily reinforced three-point hitch
• Reinforced flail shaft
• Reinforced trailing roller
• Sturdy transport rollers
• Improved impact protection

With a curb weight of approximately 890 kg, the AGF-200 is one of the heaviest machines in its class and impresses with its enormous stability and exceptionally smooth operation.

20 heavy hammer blades for clean mulching results

The total of 20 specially hardened hammer blades, each weighing approximately 1.2 kg, provide enormous rotational mass and reliably shred even dense material.

In combination with the integrated 2 counter blades, grass, brush, fallow land, straw, and dense vegetation are shredded particularly finely. Even very tall grass or bushy clippings pose no challenge for the AGF-200.

Double-spiral rotor for smooth operation and long service life

The built-in double-spiral rotor distributes the load evenly across the entire working width. This reduces vibrations and significantly improves smoothness of operation.

You also benefit from:

• lower power requirements
• less wear
• smoother operation
• longer component service life
• more even cutting results

Collision Protection and Safety Features

The standard collision protection minimizes the risk of major damage in the event of collisions with obstacles such as fence posts, rocks, or other solid objects. Upon contact, the mower can move upward and backward laterally in a controlled manner.

In addition, pendulum-suspended protective slats at the front prevent stones or other clippings from escaping. A heavy-duty trailing roller with a scraper and the standard freewheel transmission are also included.

Includes ball valve for float mode

Includes ball valve: All current JANSEN® AGF slope mowers come standard with a practical ball valve solution for activating float mode on the hydraulic cylinder.

The robust shut-off valve allows for quick and easy switching between the transport position and the float position. This enables the mulcher to adapt more flexibly to the terrain when needed and to better follow uneven ground, slopes, or road shoulders.

Simple, robust, and maintenance-free

• Mechanical solution without power connection
• Quick switching to float mode via ball valve
• Optimal ground adaptation on uneven terrain
• Compatible with all JANSEN® AGF slope mowers
• Low-maintenance, durable, and ready for immediate use
• No additional hydraulic circuit required

The ball valve solution is a simple and reliable way to utilize the float position on the hydraulic cylinder and significantly improve work quality on uneven surfaces.

Technical Specifications

• Mowing width: approx. 1980 mm
• Weight: approx. 890 kg
• Weight with packaging: approx. 983 kg
• Blade type: 20 hammer flails, approx. 1.2 kg each
• Tilt angle: +90° to -55°
• PTO shaft: included
• PTO speed: 540 rpm
• Flail shaft diameter: 170 mm
• Rear roller diameter: 170 mm
• Wall thickness: 4–15 mm (depending on position on the machine)
• Drive: 5 timing belts
• Mounting: Three-point hitch, Cat. II or higher
• Tractor power: min. 60 PS
• Assembled dimensions: approx. 260 x 215 x 112 cm (LxWxH)
• Packaging dimensions: approx. 261 x 113 x 91 cm (LxWxH)

Delivery & Assembly

The AGF-200 is delivered securely packaged and disassembled in a sturdy wooden crate. Allow approximately 4–5 hours for final assembly.

The scope of delivery includes a German operating manual and an exploded view diagram. Assembly is generally straightforward but is best performed by two people.

Before initial startup, the transmission must be filled with approximately 1.6 liters of 80W90 transmission oil.

Note:
Since the shipping company is unable to unload the item due to its size, the customer must arrange for a forklift or similar equipment.

FAQ – Frequently Asked Questions About the JANSEN® AGF-200

For which tractors is the AGF-200 suitable?

The slope mulcher is designed for tractors with 60 PS or more and is mounted via a Category II three-point hitch.

How many hydraulic connections are required?

Two double-acting hydraulic control units are required for side adjustment and tilt adjustment.

What types of areas can be worked on with the AGF-200?

Ideal for slopes, ditches, riverbanks, field edges, roadside greenery, fallow land, and municipal green spaces.

What is the working range?

The mulcher can be swiveled up to 90° upward and up to 55° downward. The maximum reach is approximately 290 cm from the center of the tractor to the outer edge of the mulcher.

What types of flails are installed?

The AGF-200 is equipped with 20 specially hardened hammer flails, each weighing approximately 1.2 kg.

What is the ball valve used for?

The ball valve allows manual switching to float mode on the hydraulic cylinder. This enables the mulcher to better adapt to uneven ground and terrain.

Is the PTO shaft included in the scope of delivery?

Yes, the appropriate PTO shaft is included as standard.

Does the mulcher have collision protection?

Yes. The integrated collision protection reduces the risk of major damage upon contact with obstacles.

Conclusion – Powerful Slope Mulcher for Large Areas

The JANSEN® AGF-200 combines an enormous reach, high mulching performance, and maximum stability in a professional slope mower.

With 20 heavy hammer flails, hydraulic side and tilt adjustment, a double-spiral rotor, a standard ball valve for float mode, and a robust construction, this slope mulcher is the ideal solution for professional users in agriculture, municipal services, and landscape maintenance.