JANSEN® AGF-160 Slope Mower – Heavy-Duty Slope Mower for Professional Mowing

The JANSEN® AGF-160 is an exceptionally robust slope mower designed for demanding applications in agriculture, municipal services, landscape maintenance, and green space management. With a working width of 155 cm, hydraulic side adjustment, and a wide swivel range, this mower is ideal for slopes, ditches, riverbanks, field edges, and hard-to-reach areas.

Compared to lighter models in the AGL series, the AGF-160 features significantly thicker materials, a reinforced bevel gearbox, and heavy hammer blades, making it one of the most robust machines in its class.

Quick Overview – Key Benefits

• Heavy-duty and robust construction for professional use
• 155 cm working width
• Hydraulic side adjustment and tilt adjustment
• Working angle from +90° to -55°
• 16 heavy hammer flails, each weighing approx. 1.2 kg
• Double-spiral rotor for smooth operation
• 2 counter blades for optimal shredding
• Reinforced flail shaft and trailing roller
• Heavily reinforced three-point hitch
• Collision protection against damage
• Heavy-duty rear roller and free-wheel transmission
• PTO shaft included as standard

Designed for slopes, ditches, and edge areas

The hydraulic side shift makes it particularly easy to work on slopes, ditches, riverbanks, road shoulders, and earthen embankments. The mulcher can be both shifted laterally and angled hydraulically. This allows you to reach even hard-to-access areas with ease.

The working range extends from +90° upward to -55° downward. This requires the tractor to have two double-acting hydraulic control circuits.

At maximum extension, the distance between the center of the tractor and the outer edge of the mulcher is approximately 254 cm.

Robust construction for the toughest conditions

The AGF-160 was specifically designed for intensive, continuous use. Among the most important improvements over previous generations are:

• Wider mulching housing
• Heavily reinforced three-point hitch
• Reinforced trailing roller
• Reinforced flail shaft
• Sturdy transport rollers
• Improved impact protection

With a curb weight of approx. 765 kg, the AGF-160 ensures exceptionally smooth operation and high stability even during demanding mowing tasks.

16 heavy hammer flails for perfect mulching results

The 16 hardened hammer flails installed, each weighing approximately 1.2 kg, generate a high flywheel mass and reliably shred even dense cuttings.

In combination with the integrated 2 counter blades, grass, brush, fallow land, and straw-like material are processed particularly finely.

Double-spiral rotor for smooth operation

The double-spiral rotor distributes the load evenly across the entire rotor shaft. As a result, the mulcher operates more smoothly, requires less power, and simultaneously reduces wear and vibration.

The result is a clean cut and a long service life for all drive components.

Safety and Ease of Use

The integrated collision protection system safeguards the machine against major damage. If the mulcher encounters obstacles such as posts or large rocks, the cutting unit can swivel upward and backward to the side.

The heavy-duty trailing roller ensures optimal ground tracking. Galvanized protective slats also prevent stones and clippings from escaping. Transport rollers make maneuvering on paved surfaces easier.

Technical Specifications

• Mowing width: 1550 mm
• Overall width: 2080 mm
• Weight: 765 kg
• Tilt angle: +90° to -55°
• Blade type: approx. 1.2 kg hammer flails (16 pieces)
• PTO shaft: included
• RPM: 540
• Flail shaft Ø: 170 mm
• Rear roller Ø: 170 mm
• Wall thickness: 4–15 mm (depending on position on the machine)
• Drive: 4 timing belts
• Mounting: Three-point hitch, Cat. II or higher
• Tractor: min. 50 PS
• Packaging dimensions: 2070x1050x870 mm (LxWxH)
• Weight with packaging: approx. 835 kg

Delivery & Assembly

The AGF-160 is delivered securely packaged and disassembled in a sturdy wooden crate. Allow approximately 4–5 hours for final assembly.

The scope of delivery includes a German operating manual and an exploded view diagram. Assembly is generally straightforward but is ideally performed by two people.

Before initial startup, the bevel gearbox must be filled with approximately 1.3 liters of 80W90 gear oil.

FAQ – Frequently Asked Questions About the JANSEN® AGF-160

For which tractors is the AGF-160 suitable?

The slope mulcher is designed for tractors with 50 PS or more and is mounted via a Category II three-point hitch.

What hydraulic connections are required?

Two double-acting hydraulic control circuits are required for side shift and tilt adjustment.

For which applications is the mulcher suitable?

Ideal for slopes, ditches, riverbanks, field edges, roadside greenery, fallow land, and general green space maintenance.

What is the swivel range?

The working range extends from +90° upward to -55° downward.

Does it come equipped with heavy hammer blades?

Yes. The AGF-160 features 16 specially hardened hammer blades, each weighing approximately 1.2 kg.

Is the PTO shaft included?

Yes, the appropriate PTO shaft is included as standard.

Conclusion – Heavy-duty slope mulcher for professional users

The JANSEN® AGF-160 combines high mulching performance, robust construction, and maximum flexibility for demanding mowing tasks. The hydraulic side shift, the large swivel range, and the heavy hammer flails make it the ideal solution for professional users in agriculture, municipal services, and landscape maintenance.

Note:
Since the shipping company is unable to unload the item due to its size, the customer must arrange for a forklift or similar equipment.