Verge mulching mower Jansen AGF-240
item number: 1775033
Watch product video
Average Rating
The especially robust construction of the AGF-240 verge mulching mower makes it stand out. In contrast to the lighter models "AGL" this is the heaviest mowing unit model (higher material strength etc.) we are dealing with. An improved three-point hanger now provides even more stability. Heavier 1.2 kg hammers are also installed in this mowing unit, not the otherwise standard 800 g hammers. The Jansen AGF-240 has a specially strengthened angular gearbox. Through lateral alignment of the mowing unit you can mow ditches, bank areas, earth walls, etc., with ease.
Fundamental improvements compared to the previous model:
This model has a mowing width of 239 cm and is driven using a P.T.O, included as part of the delivery. It can be moved to the left and right and you can set it at an angle (90° upward and 55° downward). For this function you need 2 hydraulic control circuits on your tractor, as the mower unit has 2 double-action hydraulic cylinders for this purpose.
The 24 specially hardened, 1.2 kg hammer blades, which are arranged on a double spiral drive shaft, shred clippings to a minimum size. Even very high grass, bushy or straw-like clippings are no problem for this mower because 2 counter blades are installed.
With maximum lateral alignment the dimension from the middle of the tractor to the outer edge of the mowing unit is approx. 329 cm. Please find more dimensions in the following drawings:
Furthermore, the Jansen AGF-240 comes with collision protection. This is triggered in the event of contact with hindrances, for example fencepost etc., and allows the verge mulching mower unit to swing upward, site and backward in order to minimise the risk of greater damage.
The cutting height can be set with the top controller and the runners mounted on the side. The AGF-240 mulching mower additionally has a trailing roller and a freewheel gearbox. The suspended slats at the front of the mower unit prevent stones escaping. The transport wheels make it easier for you to manoeuvre on level ground without attaching the mower to your tractor.
The mower unit is hung using the three point linkage of your tractor (from Cat. II). Your tractor should have at least 90 HP.
We have many competitors who try to attract you with especially low prices. Make sure you get a personal impression of the company and the products before you buy. It is best if you can do this in person, or at a minimum on the phone. Time and time again we see offers which display photos from the Far East. This could mean, that the product is not even in Europe. We also often hear from customers that visits and collections are not possible, that payment on delivery is not accepted and even that a deposit must be paid before the product is available.
Compare our machines with competing products! You won’t find anything comparable. We didn’t only develop these devices ourselves, but also offer excellent service (master technicians workshop) and spare parts. We have almost every part in stock. In the event of questions or problems we are only a phone call away. With us you speak with knowledgeable staff and not with “call-centre agents”!
We have all of our products assembled and ready for operation in our exhibition halls. We would love for you to come by to test them!
Technical specifications:
Note:
Fundamental improvements compared to the previous model:
- wider mulch housing
- massively reinforced and improved three-point hanger
- reinforced trailing roller
- reinforced flail shaft
- stable transport rollers
- improved collision protection
This model has a mowing width of 239 cm and is driven using a P.T.O, included as part of the delivery. It can be moved to the left and right and you can set it at an angle (90° upward and 55° downward). For this function you need 2 hydraulic control circuits on your tractor, as the mower unit has 2 double-action hydraulic cylinders for this purpose.
The 24 specially hardened, 1.2 kg hammer blades, which are arranged on a double spiral drive shaft, shred clippings to a minimum size. Even very high grass, bushy or straw-like clippings are no problem for this mower because 2 counter blades are installed.
With maximum lateral alignment the dimension from the middle of the tractor to the outer edge of the mowing unit is approx. 329 cm. Please find more dimensions in the following drawings:
Furthermore, the Jansen AGF-240 comes with collision protection. This is triggered in the event of contact with hindrances, for example fencepost etc., and allows the verge mulching mower unit to swing upward, site and backward in order to minimise the risk of greater damage.
The cutting height can be set with the top controller and the runners mounted on the side. The AGF-240 mulching mower additionally has a trailing roller and a freewheel gearbox. The suspended slats at the front of the mower unit prevent stones escaping. The transport wheels make it easier for you to manoeuvre on level ground without attaching the mower to your tractor.
The mower unit is hung using the three point linkage of your tractor (from Cat. II). Your tractor should have at least 90 HP.
We have many competitors who try to attract you with especially low prices. Make sure you get a personal impression of the company and the products before you buy. It is best if you can do this in person, or at a minimum on the phone. Time and time again we see offers which display photos from the Far East. This could mean, that the product is not even in Europe. We also often hear from customers that visits and collections are not possible, that payment on delivery is not accepted and even that a deposit must be paid before the product is available.
Compare our machines with competing products! You won’t find anything comparable. We didn’t only develop these devices ourselves, but also offer excellent service (master technicians workshop) and spare parts. We have almost every part in stock. In the event of questions or problems we are only a phone call away. With us you speak with knowledgeable staff and not with “call-centre agents”!
We have all of our products assembled and ready for operation in our exhibition halls. We would love for you to come by to test them!
Technical specifications:
- Mowing width: 2390 mm
- Weight: ca. 930 kg
- Tilt movement range: +90° to -55°
- Cutting blade type: 1.2 kg hammer blades
- P.T.O: Included in delivery
- Rpm: 540
- drive shaft Ø: 170 mm
- trailing roller Ø: 170 mm
- Wall thickness: 4 - 15 mm (depending on location on the mower)
- Drive: 5 Piece drive belt
- Mounting: Three point hitch from Cat. II
- Tractor: min. 90 HP
- Packaging measurements: 2980x1120x980 mm (LxWxH)
- Weight including packing: 1.050 kg
Note:
The device is delivered well packed and disassembled in a wooden crate. For the final assembly you should plan about 4-5 hours. Included in the delivery is an instruction manual, as well as an exploded view. The assembly is usually no problem, however, it is recommended to perform the assembly with another person. If assistance is needed, we are available by telephone. The gearbox is dry and must be filled with oil (80W90, approx. 1 liter) before first use.
Advice:Due to the size of this machine, it is required that the customer provides assistance unloading the shipment, via a tractor or forklift of some kind.
Internal item#: 1030817359
Read, write and discuss reviews... more
Write a review:
Evaluations will be activated after verification.
Customer evaluation for "Verge mulching mower Jansen AGF-240"
From:
Frank Hoyer
On:
30 Apr 2018
Robustes Gerät zum anständigen Preis
Habe den Böschungsmulcher nun fast ein Jahr in Gebrauch. Klasse Gerät und die optimale Größe für meinen Fendt 512 Favorit. Räumt jeden Graben und jede Wiese ordentlich sauber.
Verification of the authenticity of customer reviews
Every consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed.
Every consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed.
Previously viewed items
Robustes Gerät zum anständigen Preis
Habe den Böschungsmulcher nun fast ein Jahr in Gebrauch. Klasse Gerät und die optimale Größe für meinen Fendt 512 Favorit. Räumt jeden Graben und jede Wiese ordentlich sauber.