Our DPS-350 rear loader fits a standard rear three-point linkage (Cat. I). The hydraulic cylinders have a double action design. Your tractor therefore requires suitable connections (2x dual action). Hoses are included. So are the side walls for the bucket, which screw into place, turning a muck fork into a bucket with a volume of approx. 350 litres.
The working width of the bucket is approx. 1060 mm, the maximum ejection height approx. 2400 mm (depending on the lifting height of the tractor’s lower linkage). The arm can be extended. The titl cylinder can be locked in three positions for this purpose. This provides a maximum reach of approx. 3 m.
This rear loader can lift max. 400 kg when fully extended.
Compare our machines with competing products! You won’t find anything comparable. We didn’t only develop these devices ourselves, but also offer excellent service (master technicians workshop) and spare parts. We have almost every part in stock. In the event of questions or problems we are only a phone call away. With us you speak with knowledgeable staff and not with “call-centre agents”!
We have all of our products assembled and ready for operation in our exhibition halls. We would love for you to come by to test them!
Bucket volume: approx. 350 litres
Bucket dimensions: approx. 1060x650x510 mm
Required hydraulic connection: 2x double acting
Load and tilt from the tractor
Reach: approx. 3 m
Carrying capacity: max. 400 kg
Ejection height: approx. 2400 mm (depending on tractor lower linkage position)
Mounting: Three point hitch from Cat. I
Package dimensions: 1600x910x610 mm
Weight: approx. 240 kg
The bucket is delivered well packed in a steel crate. You should allow approx. 2 hours for final assembly. Should you have any further questions, please do not hesitate to phone us.