The Jansen AS-400K pruning saw easily cuts though branches up to 80 mm thick in seconds. The Jansen AS-400K pruning saw is smooth running with a very clean cut pattern, making it excellent for pruning shrubs and trees. Important note: Always cut thick branches from the top down to prevent the blades from jamming!
It has 3 saw blades (72 teeth each) and a diameter of 400 mm. The saw has an effective working width of approx. 900 mm.
The 3 carbide-tipped saw blades are driven hydraulically. V-belts distribute power to ensure smooth saw blade operation.
This is ONLY the saw head (incl. hydraulic motor).
It fits hour HMS-80 and HMS-100 hydraulic mowers and to our mower bar THS-180. Using the saw with your carrier vehicle requires the corresponding intake.
Required hydraulic connectors on the carrier vehicle: min. 1x double acting. Your machine must have a hydraulic circuit with leakage oil line. (If a specific flow rate is exceeded, the oil is returned directly to the outlet oil line. Remember the hydraulic motor, hence the branch saw, will only run correctly if all 3 lines - supply, return and leakage oil line - are connected correctly)
Depending on the circumstances and requirements, we recommend an operational speed of approximately 2 to 7 km/h.
Compare our products with competing products! Not only have we developed these devices ourselves, but we also offer you an expert service (workshop staffed by qualified technicians) and replacement parts. We typically have all parts in stock. If you have questions or problems, we are only a phone call away. Your call will be answered by competent staff, not by a call centre agent.
Almost all of our products are assembled and ready for operation in our showroom. You’re welcome to try them out! Please schedule an appointment if you wish to do so.
- Saw blades: qty. 3
- Saw blade diameter: Ø 400 mm
- Saw drive: hydraulic
- Hydraulic flow rate: min. 40 L/min.
- Operating pressure: 160 bar
- Required hydraulic connection: 1x double acting.
- Saw blade drive: V-belt
- Saw blade thickness: 3 mm
- Saw teeth: 72 teeth per saw blade
- Effective cutting width: 900 mm
- Branch diameter (max.): 80 mm
- Operating speed: 2 - 7 km/h
- Installed dimensions: 1010x460x330 mm
- Weight: approx. 55 kg
- Package dimensions: 1080x540x500 mm
- Weight incl. packaging: approx. 70 kg
The device is delivered well packed and part-assembled in a wooden crate. You should allow approx. 1 hour for final assembly. The assembly is relatively simple and does not require specialist knowledge. In the event that you require any assistance, we are happy to help you.
Internal item#: 1037483183